I just can say the same: snd-seq-midi 3680 0 (autoclean) (unused) snd-opl3-synth 9860 0 (autoclean) (unused) snd-seq-instr 4816 0 (autoclean) [snd-opl3-synth] snd-seq-midi-emul 4880 0 (autoclean) [snd-opl3-synth] snd-ainstr-fm 1780 0 (autoclean) [snd-opl3-synth] snd-seq-oss 26176 0 (unused) [root@groo brasix]# lsmod | grep snd snd-seq-midi 3680 0 (autoclean) (unused) snd-opl3-synth 9860 0 (autoclean) (unused) snd-seq-instr 4816 0 (autoclean) [snd-opl3-synth] snd-seq-midi-emul 4880 0 (autoclean) [snd-opl3-synth] snd-ainstr-fm 1780 0 (autoclean) [snd-opl3-synth] snd-seq-oss 26176 0 (unused) snd-seq-midi-event 3208 0 [snd-seq-midi snd-seq-oss] snd-seq 33264 2 [snd-seq-midi snd-opl3-synth snd-seq-instr snd -seq-midi-emul snd-seq-oss snd-seq-midi-event] snd-pcm-oss 36932 1 snd-mixer-oss 9016 1 [snd-pcm-oss] snd-cmipci 15660 2 snd-pcm 55808 0 [snd-pcm-oss snd-cmipci] snd-mpu401-uart 2752 0 [snd-cmipci] snd-rawmidi 12864 0 [snd-seq-midi snd-mpu401-uart] snd-opl3-lib 5764 0 [snd-opl3-synth snd-cmipci] snd-timer 9964 0 [snd-seq snd-pcm snd-opl3-lib] snd-seq-device 3836 0 [snd-seq-midi snd-opl3-synth snd-seq-oss snd-s eq snd-rawmidi snd-opl3-lib] snd-hwdep 3840 0 [snd-opl3-lib] snd 24804 0 [snd-seq-midi snd-opl3-synth snd-seq-instr snd -seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm snd-mpu401-uart snd-rawmidi snd-opl3-lib snd-timer snd-seq-device snd-hwdep] soundcore 3780 0 [snd]
Thx! On Fri, 2002-11-01 at 12:48, Lonnie Borntreger wrote: > On Fri, 2002-11-01 at 05:24, [EMAIL PROTECTED] wrote: > > Well, haven't tried with this card (think I have a similar one somewere) > > but the message essentially means that the OSS emulation for that device > > is not loaded. > > > > AFAIK about this: > > Actually, OSS emulaton modules should be loaded automatically when you > > try to access the mixer device (play <filename). But perhaps something > > goes wrong. Can you check if snd-mixer-oss gets loaded? > > You could try manually loading it. > > Thanks for the response. The mixer module is loaded, that's what > confuses me the most. > > -> lsmod | grep snd > snd-pcm-oss 38660 0 > snd-seq-midi 4096 0 (autoclean) (unused) > snd-cmipci 18572 2 (autoclean) > snd-pcm 63136 2 (autoclean) [snd-pcm-oss snd-cmipci] > snd-opl3-lib 6660 0 (autoclean) [snd-cmipci] > snd-hwdep 4160 0 (autoclean) [snd-opl3-lib] > snd-mpu401-uart 3296 0 (autoclean) [snd-cmipci] > snd-rawmidi 14464 0 (autoclean) [snd-seq-midi > snd-mpu401-uart] > snd-seq-oss 29504 0 (unused) > snd-seq-midi-event 3624 0 [snd-seq-midi snd-seq-oss] > snd-seq 37872 2 [snd-seq-midi snd-seq-oss > snd-seq-midi-event] > snd-timer 11596 0 [snd-pcm snd-opl3-lib snd-seq] > snd-seq-device 4112 0 [snd-seq-midi snd-opl3-lib snd-rawmidi > snd-seq-oss snd-seq] > snd-mixer-oss 10808 0 [snd-pcm-oss] > snd 29220 0 [snd-pcm-oss snd-seq-midi snd-cmipci > snd-pcm snd-opl3-lib snd-hwdep snd-mpu401-uart snd-rawmidi snd-seq-oss > snd-seq-midi-event snd-seq snd-timer snd-seq-device snd-mixer-oss] > soundcore 4516 0 [snd tvmixer bttv] > > Lonnie > > > > Anyone with this card have a working mixer interface (other than > > > alsamixer)? How about a working Mic channel? This is on an ASUS > > > A7M266-D motherboard. > > > > > > -> cat /proc/asound/oss/sndstat > > > Sound Driver:3.8.1a-980706 (ALSA v0.9.0rc2 emulation code) > > > Kernel: Linux pocket 2.4.19-16mdksmp #1 SMP Fri Oct 4 23:46:33 CDT 2002 > > > i686 > > > Config options: 0 > > > > > > Installed drivers: > > > Type 10: ALSA emulation > > > > > > Card config: > > > C-Media PCI CMI8738-MC6 (model 55) at 0xc800, irq 10 > > > > > > Audio devices: > > > 0: C-Media PCI DAC/ADC (DUPLEX) > > > > > > Synth devices: NOT ENABLED IN CONFIG > > > > > > Midi devices: > > > 0: MPU-401 (UART) > > > > > > Timers: > > > 7: system timer > > > > > > Mixers: NOT ENABLED IN CONFIG > > >
