I have problems with my HP psc 2210 all-in-one printer.
$ lpr # works OK, but after some jobs it stops.
# all following print jobs are completed or aborted, but
nothing is printed.
$ xsane # works OK, once there was an error during a scan, but a
rescan went fine
$ mdir p: # works OK
$ mcopy p: # works OK
$ xojpanel # works OK
$ ptal-hp clock -set # works OK
Everything seems to be working fine, but after a while the
printing stops. The only way to get it working again is a reboot.
The strange thing is that the current printjob is always completely
finished, even a very large job with "out of paper" in between.
I tried the following:
- printing to "/dev/usb/lp0" and "ptal:/mlc:usb:PSC_2200_Series"
- installing a separate PCI usb-controller
- switching off/on the printer
- using uhci instead of usb_uhci
- rmmod/insmod of the usb and printer modules
- stop/start usb and hpoj
Nothing helps...
System: AMD Athlon 1800+
Linux: Mandrake 9.0
Kernel: 2.4.19-16mdksecure
Output from ptal-hp:
Model name: psc 2205
Model number: C8661A
Serial number: MY27VD80HG0G
Firmware version: Z0L6004HR
Firmware datecode: (unavailable)
/etc/cups/printers.conf:
<DefaultPrinter psc>
Info HP psc 2210 all-in-one
Location zolder
DeviceURI ptal:/mlc:usb:PSC_2200_Series
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
Some relevant lines from /var/log/messages:
Nov 7 15:00:00 humulus CROND[31403]: (root) CMD (/usr/bin/ptal-hp clock -set
1>/dev/null 2>/dev/null)
Nov 7 15:00:01 humulus ptal-mlcd: ERROR at ExMgr.cpp:2485,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp9>, pid=5989, e=19 Couldn't find
device: exhausted all possible device nodes!
Nov 7 16:06:34 humulus kernel: Linux version 2.4.19-16mdksecure
([EMAIL PROTECTED]) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 SMP
Fri Sep 20 16:53:59 CEST 2002
Nov 7 16:06:34 humulus kernel: usb.c: registered new driver usbdevfs
Nov 7 16:06:34 humulus kernel: usb.c: registered new driver hub
Nov 7 16:06:34 humulus kernel: usb-uhci.c: $Revision: 1.275 $ time 17:28:41 Sep 20
2002
Nov 7 16:06:34 humulus kernel: usb-uhci.c: High bandwidth mode enabled
Nov 7 16:06:34 humulus kernel: usb-uhci.c: USB UHCI at I/O 0xc000, IRQ 11
Nov 7 16:06:34 humulus kernel: usb-uhci.c: Detected 2 ports
Nov 7 16:06:34 humulus kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 7 16:06:34 humulus kernel: hub.c: USB hub found
Nov 7 16:06:34 humulus kernel: hub.c: 2 ports detected
Nov 7 16:06:34 humulus kernel: usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 3
Nov 7 16:06:34 humulus kernel: usb-uhci.c: Detected 2 ports
Nov 7 16:06:34 humulus kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 7 16:06:34 humulus kernel: hub.c: USB hub found
Nov 7 16:06:34 humulus kernel: hub.c: 2 ports detected
Nov 7 16:06:34 humulus kernel: usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 3
Nov 7 16:06:34 humulus kernel: usb-uhci.c: Detected 2 ports
Nov 7 16:06:34 humulus kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 7 16:06:34 humulus kernel: hub.c: USB hub found
Nov 7 16:06:34 humulus kernel: hub.c: 2 ports detected
Nov 7 16:06:34 humulus kernel: usb-uhci.c: v1.275:USB Universal Host Controller
Interface driver
Nov 7 16:06:34 humulus kernel: Initializing USB Mass Storage driver...
Nov 7 16:06:34 humulus kernel: usb.c: registered new driver usb-storage
Nov 7 16:06:34 humulus kernel: USB Mass Storage support registered.
Nov 7 16:06:34 humulus kernel: usbdevfs: remount parameter error
Nov 7 16:06:34 humulus kernel: usb.c: registered new driver usblp
Nov 7 16:06:34 humulus kernel: printer.c: v0.11: USB Printer Device Class driver
Nov 7 16:06:34 humulus kernel: hub.c: USB new device connect on bus1/2, assigned
device number 2
Nov 7 16:06:34 humulus kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if
1 alt 0 proto 2 vid 0x03F0 pid 0x2911
Nov 7 16:06:34 humulus kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Nov 7 16:06:34 humulus kernel: Vendor: HP Model: psc 2205 Rev: 1.00
Nov 7 16:06:34 humulus kernel: Type: Direct-Access ANSI SCSI
revision: 02
Nov 7 16:06:08 humulus usb: Initializing USB controller (usb-uhci): succeeded
Nov 7 16:06:08 humulus usb: Initializing USB controller (usb-storage): succeeded
Nov 7 16:06:08 humulus usb: Mount USB filesystem succeeded
Nov 7 16:06:08 humulus usb: Loading USB printer succeeded
Nov 7 16:06:47 humulus ptal-mlcd: SYSLOG at ExMgr.cpp:701,
dev=<mlc:usb:PSC_2200_Series>, pid=2930, e=2 ptal-mlcd successfully
initialized.
Nov 7 16:06:47 humulus ptal-printd: ptal-printd(mlc:usb:PSC_2200_Series) successfully
initialized using /var/run/ptal-printd/mlc_usb_PSC_2200_Series*.
Nov 7 16:06:47 humulus ptal-photod: ptal-photod(mlc:usb:PSC_2200_Series) successfully
initialized, listening on port 5703.
Nov 7 16:06:52 humulus ptal-mlcd: SYSLOG at
/home/tkamppeter/rpm/BUILD/hpoj-0.90/mlcd/bp/ex/ExMgr.h:564,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp0>, pid=2930, e=11 ptal-mlcd
successfully activated, mode=1284.4.
Nov 7 16:06:54 humulus cups: cupsd startup succeeded
Nov 7 17:00:00 humulus CROND[5498]: (root) CMD (/usr/bin/ptal-hp clock -set
1>/dev/null 2>/dev/null)
Nov 7 17:09:13 humulus kernel: usb-uhci.c: interrupt, status 2, frame# 241
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: nonzero read/write bulk status
received: -84
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: error -84 reading from printer
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: nonzero read/write bulk status
received: -84
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: error -84 reading from printer
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: nonzero read/write bulk status
received: -84
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: error -84 reading from printer
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: nonzero read/write bulk status
received: -84
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: error -84 reading from printer
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: nonzero read/write bulk status
received: -84
..
Nov 7 17:09:13 humulus kernel: usb.c: USB disconnect on device 2
Nov 7 17:09:13 humulus ptal-mlcd: ERROR at ExMgr.cpp:2744,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp0>, pid=2930, e=19 llioService:
llioRead returns -1, expected=6!
Nov 7 17:09:13 humulus ptal-mlcd: ERROR at ExMgr.cpp:902,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp0>, pid=2930, e=19
exClose(reason=0x0010)
Nov 7 17:09:13 humulus kernel: printer.c: usblp0: removed
Nov 7 17:09:27 humulus kernel: hub.c: USB new device connect on bus1/2, assigned
device number 3
Nov 7 17:09:27 humulus kernel: printer.c: usblp0: USB Bidirectional printer dev 3 if
1 alt 0 proto 2 vid 0x03F0 pid 0x2911
Nov 7 17:09:30 humulus /etc/hotplug/usb.agent: ... no modules for USB product
3f0/2911/100
Nov 7 17:10:29 humulus ptal-mlcd: SYSLOG at
/home/tkamppeter/rpm/BUILD/hpoj-0.90/mlcd/bp/ex/ExMgr.h:564,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp0>, pid=2930, e=11 ptal-mlcd
successfully activated, mode=1284.4.
Nov 7 17:17:54 humulus kernel: usb.c: USB disconnect on device 3
Nov 7 17:17:55 humulus ptal-mlcd: ERROR at ExMgr.cpp:2744,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp0>, pid=2930, e=19 llioService:
llioRead returns -1, expected=6!
Nov 7 17:17:55 humulus ptal-mlcd: ERROR at ExMgr.cpp:902,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp0>, pid=2930, e=19
exClose(reason=0x0010)
Nov 7 17:17:55 humulus kernel: printer.c: usblp0: removed
Nov 7 17:18:18 humulus kernel: usb.c: deregistering driver usblp
Nov 7 17:18:18 humulus kernel: usb.c: deregistering driver usb-storage
Nov 7 17:18:18 humulus kernel: scsi : 0 hosts left.
Nov 7 17:18:18 humulus kernel: usb.c: USB disconnect on device 1
Nov 7 17:18:18 humulus kernel: usb.c: USB bus 1 deregistered
Nov 7 17:18:18 humulus kernel: usb.c: USB disconnect on device 1
Nov 7 17:18:18 humulus kernel: usb.c: USB bus 2 deregistered
Nov 7 17:18:18 humulus kernel: usb.c: USB disconnect on device 1
Nov 7 17:18:18 humulus kernel: usb.c: USB bus 3 deregistered
Nov 7 17:18:31 humulus kernel: uhci.c: USB Universal Host Controller Interface driver
v1.1
Nov 7 17:18:31 humulus kernel: uhci.c: USB UHCI at I/O 0xc000, IRQ 11
Nov 7 17:18:31 humulus kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 7 17:18:31 humulus kernel: hub.c: USB hub found
Nov 7 17:18:31 humulus kernel: hub.c: 2 ports detected
Nov 7 17:18:31 humulus kernel: uhci.c: USB UHCI at I/O 0xd800, IRQ 3
Nov 7 17:18:31 humulus kernel: usb.c: new USB bus registered, assigned bus number 2
Nov 7 17:18:31 humulus kernel: hub.c: USB hub found
Nov 7 17:18:31 humulus kernel: hub.c: 2 ports detected
Nov 7 17:18:31 humulus kernel: uhci.c: USB UHCI at I/O 0xdc00, IRQ 3
Nov 7 17:18:31 humulus kernel: usb.c: new USB bus registered, assigned bus number 3
Nov 7 17:18:31 humulus kernel: hub.c: USB hub found
Nov 7 17:18:31 humulus kernel: hub.c: 2 ports detected
Nov 7 17:18:35 humulus /etc/hotplug/usb.agent: ... no modules for USB product 0/0/0
Nov 7 17:18:44 humulus kernel: usb.c: registered new driver usblp
Nov 7 17:18:44 humulus kernel: printer.c: v0.11: USB Printer Device Class driver
Nov 7 17:18:45 humulus ptal-mlcd: ERROR at ExMgr.cpp:2485,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp9>, pid=2930, e=19 Couldn't find
device: exhausted all possible device nodes!
Nov 7 17:18:51 humulus kernel: hub.c: USB new device connect on bus1/2, assigned
device number 2
Nov 7 17:18:51 humulus kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if
1 alt 0 proto 2 vid 0x03F0 pid 0x2911
Nov 7 17:18:54 humulus /etc/hotplug/usb.agent: ... no modules for USB product
3f0/2911/100
Nov 7 17:19:15 humulus ptal-mlcd: SYSLOG at
/home/tkamppeter/rpm/BUILD/hpoj-0.90/mlcd/bp/ex/ExMgr.h:564,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp0>, pid=2930, e=19 ptal-mlcd
successfully activated, mode=1284.4.
Nov 7 17:37:14 humulus kernel: printer.c: usblp0: nonzero read/write bulk status
received: -84
Nov 7 17:37:14 humulus kernel: printer.c: usblp0: error -84 reading from printer
Nov 7 17:37:14 humulus kernel: printer.c: usblp0: nonzero read/write bulk status
received: -84
Nov 7 17:37:14 humulus kernel: usb.c: USB disconnect on device 2
Nov 7 17:37:14 humulus ptal-mlcd: ERROR at ExMgr.cpp:2744,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp0>, pid=2930, e=19 llioService:
llioRead returns -1, expected=6!
Nov 7 17:37:14 humulus ptal-mlcd: ERROR at ExMgr.cpp:902,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp0>, pid=2930, e=19
exClose(reason=0x0010)
Nov 7 17:37:15 humulus kernel: printer.c: usblp0: removed
Nov 7 18:00:00 humulus CROND[6811]: (root) CMD (/usr/bin/ptal-hp clock -set
1>/dev/null 2>/dev/null)
Nov 7 18:00:00 humulus ptal-mlcd: ERROR at ExMgr.cpp:2485,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp9>, pid=2930, e=19 Couldn't find
device: exhausted all possible device nodes!
Nov 7 19:00:00 humulus CROND[7770]: (root) CMD (/usr/bin/ptal-hp clock -set
1>/dev/null 2>/dev/null)
Nov 7 19:00:00 humulus ptal-mlcd: ERROR at ExMgr.cpp:2485,
dev=<mlc:usb:PSC_2200_Series@/dev/usb/lp9>, pid=2930, e=19 Couldn't find
device: exhausted all possible device nodes!
Nov 7 19:22:24 humulus kernel: hub.c: USB new device connect on bus1/2, assigned
device number 3
Nov 7 19:22:24 humulus kernel: printer.c: usblp0: USB Bidirectional printer dev 3 if
1 alt 0 proto 2 vid 0x03F0 pid 0x2911
Nov 7 19:22:27 humulus /etc/hotplug/usb.agent: ... no modules for USB product
3f0/2911/100
One job from /var/log/cups/error_log:
D [07/Nov/2002:17:02:06 +0100] StartJob(77, 0x809a848)
D [07/Nov/2002:17:02:06 +0100] StartJob() id = 77, file = 0/1
D [07/Nov/2002:17:02:06 +0100] job-sheets=none,none
D [07/Nov/2002:17:02:06 +0100] banner_page = 0
D [07/Nov/2002:17:02:06 +0100] StartJob: argv =
"psc","77","root","STDIN","1","page-top=36 page-bottom=36 page-left=36 page-right=36
cpi=12 lpi=7 wrap scaling=100","/var/spool/cups/d00077-001"
D [07/Nov/2002:17:02:06 +0100] StartJob: envp =
"PATH=/usr/lib/cups/filter:/bin:/usr/bin","SOFTWARE=CUPS/1.1","USER=root","CHARSET=iso-8859-1","LANG=en_US","TZ=GMT","PPD=/etc/cups/ppd/psc.ppd","CUPS_SERVERROOT=/etc/cups","RIP_MAX_CACHE=8m","TMPDIR=/var/spool/cups/tmp","CONTENT_TYPE=application/postscript","DEVICE_URI=ptal:/mlc:usb:PSC_2200_Series","PRINTER=psc","CUPS_DATADIR=/usr/share/cups","CUPS_FONTPATH=/usr/share/cups/fonts","","",""
D [07/Nov/2002:17:02:06 +0100] StartJob: statusfds = 3, 6
D [07/Nov/2002:17:02:06 +0100] StartJob: filterfds[1] = 7, -1
D [07/Nov/2002:17:02:06 +0100] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [07/Nov/2002:17:02:06 +0100] StartJob: filterfds[0] = 8, 9
D [07/Nov/2002:17:02:06 +0100] start_process("/usr/lib/cups/filter/pstops",
0xbfffb4e0, 0xbfff6990, 7, 9, 6)
I [07/Nov/2002:17:02:06 +0100] Started filter /usr/lib/cups/filter/pstops (PID 5576)
for job 77.
D [07/Nov/2002:17:02:06 +0100] StartJob: filter = "/usr/lib/cups/filter/cupsomatic"
D [07/Nov/2002:17:02:06 +0100] StartJob: filterfds[1] = 7, 10
D [07/Nov/2002:17:02:06 +0100] start_process("/usr/lib/cups/filter/cupsomatic",
0xbfffb4e0, 0xbfff6990, 8, 10, 6)
I [07/Nov/2002:17:02:06 +0100] Started filter /usr/lib/cups/filter/cupsomatic (PID
5577) for job 77.
D [07/Nov/2002:17:02:06 +0100] StartJob: backend = "/usr/lib/cups/backend/ptal"
D [07/Nov/2002:17:02:06 +0100] StartJob: filterfds[0] = -1, 8
D [07/Nov/2002:17:02:06 +0100] start_process("/usr/lib/cups/backend/ptal", 0xbfffb4e0,
0xbfff6990, 7, 8, 6)
I [07/Nov/2002:17:02:06 +0100] Started backend /usr/lib/cups/backend/ptal (PID 5578)
for job 77.
D [07/Nov/2002:17:02:06 +0100] StopJob: printer state is 4
D [07/Nov/2002:17:02:06 +0100] Page = 595x842; 0,0 to 595,842
D [07/Nov/2002:17:02:06 +0100] 0 %%BoundingBox: 0 0 594 841
D [07/Nov/2002:17:02:06 +0100] 0 %%Creator: Qt 3.0.5
D [07/Nov/2002:17:02:06 +0100] 0 %%CreationDate: Thu Nov 7 16:43:09 2002
D [07/Nov/2002:17:02:06 +0100] 0 %%Orientation: Portrait
D [07/Nov/2002:17:02:06 +0100] 0 %%Pages: 9
D [07/Nov/2002:17:02:06 +0100] 0 %%DocumentFonts: Helvetica Helvetica-Bold
Helvetica-Oblique Courier
D [07/Nov/2002:17:02:06 +0100] 0 %%EndComments
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginProlog
D [07/Nov/2002:17:02:06 +0100] 0 %%EndProlog
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginSetup
D [07/Nov/2002:17:02:06 +0100] 0 %% Font Page 00
D [07/Nov/2002:17:02:06 +0100] ptal-connect: connecting to device
"mlc:usb:PSC_2200_Series"... Cupsomatic backend version $Revision: 2.13 $ running...
D [07/Nov/2002:17:02:06 +0100] ppd=/etc/cups/ppd/psc.ppd
D [07/Nov/2002:17:02:06 +0100] Pondering option `page-top=36'
D [07/Nov/2002:17:02:06 +0100] Unknown option page-top=36.
D [07/Nov/2002:17:02:06 +0100] Pondering option `page-bottom=36'
D [07/Nov/2002:17:02:06 +0100] Unknown option page-bottom=36.
D [07/Nov/2002:17:02:06 +0100] Pondering option `page-left=36'
D [07/Nov/2002:17:02:06 +0100] Unknown option page-left=36.
D [07/Nov/2002:17:02:06 +0100] Pondering option `page-right=36'
D [07/Nov/2002:17:02:06 +0100] Unknown option page-right=36.
D [07/Nov/2002:17:02:06 +0100] Pondering option `cpi=12'
D [07/Nov/2002:17:02:06 +0100] Unknown option cpi=12.
D [07/Nov/2002:17:02:06 +0100] Pondering option `lpi=7'
D [07/Nov/2002:17:02:06 +0100] Unknown option lpi=7.
D [07/Nov/2002:17:02:06 +0100] Pondering option `wrap'
D [07/Nov/2002:17:02:06 +0100] Unknown bool? option wrap.
D [07/Nov/2002:17:02:06 +0100] Pondering option `scaling=100'
D [07/Nov/2002:17:02:06 +0100] Unknown option scaling=100.
D [07/Nov/2002:17:02:06 +0100] Seaerching job for option settings ...
D [07/Nov/2002:17:02:06 +0100] Found: %%BeginFeature: *Resolution 300DraftColorCMYK
D [07/Nov/2002:17:02:06 +0100] Option: Resolution=300DraftColorCMYK --> Setting option
D [07/Nov/2002:17:02:06 +0100] Found: %% FoomaticOpt: Resolution=300DraftColorCMYK
D [07/Nov/2002:17:02:06 +0100] Option: Resolution=300DraftColorCMYK --> Setting option
D [07/Nov/2002:17:02:06 +0100] Found: %%BeginFeature: *PageSize A4
D [07/Nov/2002:17:02:06 +0100] Option: PageSize=A4 --> Setting option
D [07/Nov/2002:17:02:06 +0100] Found: %% FoomaticOpt: PageSize=A4
D [07/Nov/2002:17:02:06 +0100] Option: PageSize=A4 --> Setting option
D [07/Nov/2002:17:02:06 +0100] Found: %%BeginFeature: *Duplex None
D [07/Nov/2002:17:02:06 +0100] Option: Duplex=None --> Setting option
D [07/Nov/2002:17:02:06 +0100] Found: %% FoomaticOpt: Duplex=None
D [07/Nov/2002:17:02:06 +0100] Option: Duplex=None --> Setting option
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginFont: Helvetica-Oblique
D [07/Nov/2002:17:02:06 +0100] 0 %%FontName: Helvetica-Oblique-Uni
D [07/Nov/2002:17:02:06 +0100] 0 %%Creator: Composite font created by Qt
D [07/Nov/2002:17:02:06 +0100] 0 %%EndFont
D [07/Nov/2002:17:02:06 +0100] 0 %% Font Page 00
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginFont: Helvetica
D [07/Nov/2002:17:02:06 +0100] 0 %%FontName: Helvetica-Uni
D [07/Nov/2002:17:02:06 +0100] 0 %%Creator: Composite font created by Qt
D [07/Nov/2002:17:02:06 +0100] 0 %%EndFont
D [07/Nov/2002:17:02:06 +0100] 0 %%CreationDate: Tue Sep 17 16:16:38 1991
D [07/Nov/2002:17:02:06 +0100] 0 %%VMusage: 57844 76768
D [07/Nov/2002:17:02:06 +0100] 0 %% Copyright International Business Machines,Corp.
1991
D [07/Nov/2002:17:02:06 +0100] 0 %% IBM Courier is a Trademark of the IBM Corporation.
D [07/Nov/2002:17:02:06 +0100] /usr/lib/cups/filter/cupsomatic: inserted option PS
code:
D [07/Nov/2002:17:02:06 +0100] gs PID pid2=5583
D [07/Nov/2002:17:02:06 +0100] gs command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET
-dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PACKARD"
-sDeviceModel="deskjet 5550" -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842
-dDuplex=false -r300
-sIjsParams=Quality:Quality=1,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2
-dIjsUseOutputFD -sOutputFile=- -
D [07/Nov/2002:17:02:06 +0100] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER'
'-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs'
'-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=deskjet 5550'
'-dDEVICEWIDTHPOINTS=595' '-dDEVICEHEIGHTPOINTS=842' '-dDuplex=false' '-r300'
'-sIjsParams=Quality:Quality=1,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2'
'-dIjsUseOutputFD' '-sOutputFile=/dev/fd/3' '/dev/fd/0' 3>&1 1>&2
D [07/Nov/2002:17:02:06 +0100] **** Unable to open the initial device, quitting.
D [07/Nov/2002:17:02:06 +0100] Couldn't exec foomatic-gswrapper -q -dBATCH
-dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs
-sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 5550"
-dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dDuplex=false -r300
-sIjsParams=Quality:Quality=1,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2
-dIjsUseOutputFD -sOutputFile=- - at /usr/lib/cups/filter/cupsomatic line 1097.
D [07/Nov/2002:17:02:06 +0100] tail process done writing data to *main::STDOUT
D [07/Nov/2002:17:02:06 +0100] KID4 finished
D [07/Nov/2002:17:02:06 +0100] 0 %% Font Page 00
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginFont: Courier
D [07/Nov/2002:17:02:06 +0100] 0 %%FontName: Courier-Uni
D [07/Nov/2002:17:02:06 +0100] 0 %%Creator: Composite font created by Qt
D [07/Nov/2002:17:02:06 +0100] 0 %%EndFont
D [07/Nov/2002:17:02:06 +0100] 0 %% Font Page 00
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginFont: Helvetica-Bold
D [07/Nov/2002:17:02:06 +0100] 0 %%FontName: Helvetica-Bold-Uni
D [07/Nov/2002:17:02:06 +0100] 0 %%Creator: Composite font created by Qt
D [07/Nov/2002:17:02:06 +0100] 0 %%EndFont
D [07/Nov/2002:17:02:06 +0100] 0 %%EndSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 1 1
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 1 1
D [07/Nov/2002:17:02:06 +0100] pw = 523.0, pl = 770.0
D [07/Nov/2002:17:02:06 +0100] PageLeft = 36.0, PageRight = 559.0
D [07/Nov/2002:17:02:06 +0100] PageTop = 806.0, PageBottom = 36.0
D [07/Nov/2002:17:02:06 +0100] PageWidth = 595.0, PageLength = 842.0
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%EndPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 2 2
D [07/Nov/2002:17:02:06 +0100] pw = 523.0, pl = 770.0
D [07/Nov/2002:17:02:06 +0100] PageLeft = 36.0, PageRight = 559.0
D [07/Nov/2002:17:02:06 +0100] PageTop = 806.0, PageBottom = 36.0
D [07/Nov/2002:17:02:06 +0100] PageWidth = 595.0, PageLength = 842.0
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%EndPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 3 3
D [07/Nov/2002:17:02:06 +0100] pw = 523.0, pl = 770.0
D [07/Nov/2002:17:02:06 +0100] PageLeft = 36.0, PageRight = 559.0
D [07/Nov/2002:17:02:06 +0100] PageTop = 806.0, PageBottom = 36.0
D [07/Nov/2002:17:02:06 +0100] PageWidth = 595.0, PageLength = 842.0
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%EndPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 4 4
D [07/Nov/2002:17:02:06 +0100] pw = 523.0, pl = 770.0
D [07/Nov/2002:17:02:06 +0100] PageLeft = 36.0, PageRight = 559.0
D [07/Nov/2002:17:02:06 +0100] PageTop = 806.0, PageBottom = 36.0
D [07/Nov/2002:17:02:06 +0100] PageWidth = 595.0, PageLength = 842.0
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%EndPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 5 5
D [07/Nov/2002:17:02:06 +0100] pw = 523.0, pl = 770.0
D [07/Nov/2002:17:02:06 +0100] PageLeft = 36.0, PageRight = 559.0
D [07/Nov/2002:17:02:06 +0100] PageTop = 806.0, PageBottom = 36.0
D [07/Nov/2002:17:02:06 +0100] PageWidth = 595.0, PageLength = 842.0
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%EndPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 6 6
D [07/Nov/2002:17:02:06 +0100] pw = 523.0, pl = 770.0
D [07/Nov/2002:17:02:06 +0100] PageLeft = 36.0, PageRight = 559.0
D [07/Nov/2002:17:02:06 +0100] PageTop = 806.0, PageBottom = 36.0
D [07/Nov/2002:17:02:06 +0100] PageWidth = 595.0, PageLength = 842.0
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%EndPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 7 7
D [07/Nov/2002:17:02:06 +0100] pw = 523.0, pl = 770.0
D [07/Nov/2002:17:02:06 +0100] PageLeft = 36.0, PageRight = 559.0
D [07/Nov/2002:17:02:06 +0100] PageTop = 806.0, PageBottom = 36.0
D [07/Nov/2002:17:02:06 +0100] PageWidth = 595.0, PageLength = 842.0
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%EndPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 8 8
D [07/Nov/2002:17:02:06 +0100] pw = 523.0, pl = 770.0
D [07/Nov/2002:17:02:06 +0100] PageLeft = 36.0, PageRight = 559.0
D [07/Nov/2002:17:02:06 +0100] PageTop = 806.0, PageBottom = 36.0
D [07/Nov/2002:17:02:06 +0100] PageWidth = 595.0, PageLength = 842.0
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%EndPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Page: 9 9
D [07/Nov/2002:17:02:06 +0100] pw = 523.0, pl = 770.0
D [07/Nov/2002:17:02:06 +0100] PageLeft = 36.0, PageRight = 559.0
D [07/Nov/2002:17:02:06 +0100] PageTop = 806.0, PageBottom = 36.0
D [07/Nov/2002:17:02:06 +0100] PageWidth = 595.0, PageLength = 842.0
D [07/Nov/2002:17:02:06 +0100] 0 %%BeginPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%EndPageSetup
D [07/Nov/2002:17:02:06 +0100] 0 %%Trailer
D [07/Nov/2002:17:02:06 +0100] Saw Trailer!
D [07/Nov/2002:17:02:06 +0100] Saw EOF!
D [07/Nov/2002:17:02:06 +0100] error closing *main::KID3 at
/usr/lib/cups/filter/cupsomatic line 892, <STDIN> line 4028.
E [07/Nov/2002:17:02:06 +0100] PID 5577 stopped with status 32!
D [07/Nov/2002:17:02:16 +0100] successful.
D [07/Nov/2002:17:02:16 +0100] UpdateJob: job 77, file 0 is complete.
D [07/Nov/2002:17:02:16 +0100] CancelJob: id = 77
D [07/Nov/2002:17:02:16 +0100] StopJob: id = 77, force = 0
D [07/Nov/2002:17:02:16 +0100] StopJob: printer state is 3
