Also, my sister taught me the trick of spraying it with a little water with vinegar in it while still fairly warm. Helps loosen all that stuff up to make it easier to clean.
Joy and family -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bob Kennedy Sent: Sunday, January 16, 2011 7:14 AM To: [email protected] Subject: Re: [CnD] cleaning the george foreman I used to have one and it came with a plastic scraper that looked like a fork. The prongs were for getting into the grooves. Beyond that, like you said catch it as soon as it cools down to where you can touch it without getting burned and it's a lot less work. ----- Original Message ----- From: "Scott Shade" <[email protected]> To: <[email protected]> Sent: Sunday, January 16, 2011 1:13 AM Subject: Re: [CnD] cleaning the george foreman If your inserts can come out, I think you can put them in the dishwasher and be good to go on pot scrubber, lacking that, there's no substitute for dawn dish washing soap and a lot of elbow grease. but if you can make it a habit to clean it while its still semi warm with good soapy water, the grease will break up and come off farely easy, provided the teflon coding is still good. -- Email services provided by the System Access Mobile Network. Visit www.serotek.com to learn more about accessibility anywhere. _______________________________________________ Cookinginthedark mailing list [email protected] http://acbradio.org/mailman/listinfo/cookinginthedark _______________________________________________ Cookinginthedark mailing list [email protected] http://acbradio.org/mailman/listinfo/cookinginthedark _______________________________________________ Cookinginthedark mailing list [email protected] http://acbradio.org/mailman/listinfo/cookinginthedark
