Yes it's set up right.
Now what you wanna do is to put the big rack in first, the longer feeted
rack.
Then the short one goes over top of that one.
You don't need the two pie pan shped items uness you wanna bake somethin' in
it.
Jerry Mader

-----Original Message-----
From: Cookinginthedark [mailto:[email protected]] On
Behalf Of Jude DaShiell
Sent: Monday, March 04, 2013 8:47 PM
To: [email protected]
Subject: [CnD] new wave oven setup?

I understand how the external pieces fit together but do not know that I 
have the parts that go inside the oven set up correctly.  In the base of 
the oven I have a round metal tray like a pie plate with sides going 
straight up positioned with opening face up.  There are two racks and 
another of these pie plate pieces too.  I have a rack with feet down 
inside of and on top of the pie plate.  There is probably only supposed to 
be one plate and one rack in the oven at any one time and for now I have 
both of them inside but haven't plugged the oven in yet.  I'll take one of 
those sets out for use later.  I have an expander ring with the oven and 
some strange rubber-like trays came with it too.  There is also something 
like a wooden base with a groove circling it near the edge of the circle.  
I suppose that's for the pizza part of the cooking set.  I have a couple 
frozen pork chops I may try cooking tonight if I can get some proper 
understanding of set up and push button controls on oven head.  I 
understand the calculator pad buttons with zero at bottom center and 
figure 1, 2, and 3 are across the top with 4, 5, and 6 in the center and 
7, 8, and 9 just above the zero key.  However there are five more buttons 
to the right of the calculator keypad and I don't know what those are.  
The dvd just told me about the new wave cooking club and wasn't helpful in 
that or beyond that since I had to use google to finally find the actual 
club web site.  There are either capital letters or extra symbols in the 
web site's url the dvd did not speak.  I have one plastic ring on top of 
the base and I have the head sitting inside of that ring.  The head turns 
only so much to lock into position I found too.

---------------------------------------------------------------------------
jude <[email protected]>
Remember Microsoft didn't write Tiger 10.4 or any of its successors.

_______________________________________________
Cookinginthedark mailing list
[email protected]
http://acbradio.org/mailman/listinfo/cookinginthedark

_______________________________________________
Cookinginthedark mailing list
[email protected]
http://acbradio.org/mailman/listinfo/cookinginthedark

Reply via email to