Clay Jones wrote: > Hi, > > I am getting the following error when building the > Serengeti_cheetah_fam10 target: > > > gcc -m32 -nostdlib -nostartfiles -static -o coreboot -T ldscript.ld > crt0.o > nm -n coreboot | sort > coreboot.map > objcopy --gap-fill 0xff -O binary coreboot coreboot.strip > cp ../payload.elf payload > ./buildrom coreboot.strip coreboot.rom payload 0x3f000 0x7f000 > coreboot image is 258104 bytes; only 258048 allowed > Coreboot input file larger than allowed size! > : Success > make[1]: *** [coreboot.rom] Error 2 > make[1]: Leaving directory > `/home/cjones/coreboot-v2/targets/amd/serengeti_cheetah_fam10/serengeti_ > cheetah_fam10/fallback' > make: *** [fallback/coreboot.rom] Error 1 > [EMAIL PROTECTED]:/home/cjones/coreboot-v2/targets/amd/serengeti_cheetah_fam > 10/serengeti_cheetah_fam10 > > > The coreboot image is always a little bigger that the space allowed. I > have seen this before, but I can't remember what causes it. Anybody > know? > > >
Can you post your distribution, gcc version and binutils versions? Are you using buildrom? Did you build a normal image too? did you change the mainboard or target config.lb? I get the following using buildrom on my local directory: ./buildrom coreboot.strip coreboot.rom payload 0x3f000 0x7f000 Payload: 61872 coreboot: 258048 ROM size: 520192 Left space: 200272 Marc -- Marc Jones Senior Firmware Engineer (970) 226-9684 Office mailto:[EMAIL PROTECTED] http://www.amd.com/embeddedprocessors -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
