Clay Jones wrote:
I found the problem. The wrong ar command was being used because the
make file does not have " $(CROSS_COMPILE)" in front of the ar command.
I think this might fix the problem. You will need to run buildtarget
again. I hope some of the make experts to chime in on this.
Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:[EMAIL PROTECTED]
http://www.amd.com/embeddedprocessors
Cross compile flags were missing for ar to create coreboot.a.
Signed-off-by: Marc Jones <[EMAIL PROTECTED]>
Index: coreboot-v2/src/config/Config.lb
===================================================================
--- coreboot-v2.orig/src/config/Config.lb 2008-02-06 10:17:43.000000000
-0700
+++ coreboot-v2/src/config/Config.lb 2008-02-06 10:17:22.000000000 -0700
@@ -35,7 +35,7 @@
makerule coreboot.a
depends "$(OBJECTS)"
action "rm -f coreboot.a"
- action "ar cr coreboot.a $(OBJECTS)"
+ action "$(CROSS_COMPILE) ar cr coreboot.a $(OBJECTS)"
end
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
