-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello,
Attached patch fixes two typos in the sio_setup routine (comment + wrong exitLDN device) and sets the chipset voltage from 1.6V to 1.5V. Signed-off-by: Rudolf Marek <[EMAIL PROTECTED]> Thanks, Rudolf -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHt4DW3J9wPJqZRNURAhAzAJ9bgdEv341buXBzcKnRMt4joShohACg1Icr d1m7BLE8hhGCOYdoOcdVRcg= =RMt8 -----END PGP SIGNATURE-----
Index: src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c =================================================================== --- src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c (revision 3100) +++ src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c (working copy) @@ -182,16 +182,15 @@ pnp_enter_ext_func_mode(GPIO_DEV); pnp_set_logical_device(GPIO_DEV); - pnp_exit_ext_func_mode(GPIO_DEV); - + /* set memory voltage to 2.75V, vcore offset + 100mV, 1.5V Chipset voltage */ - pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101110 0=output 1=input */ - pnp_write_config(GPIO_DEV, 0xe1, 0x1); /* set output val */ + pnp_write_config(GPIO_DEV, 0x30, 0x9); /* Enable GPIO 2 & GPIO 5 */ pnp_write_config(GPIO_DEV, 0xe2, 0x0); /* no inversion */ - pnp_write_config(GPIO_DEV, 0xe3, 0x3); /* 0000 0011 0=output 1=input */ - pnp_write_config(GPIO_DEV, 0xe4, 0xa4); /* set output val 1010 0100 */ pnp_write_config(GPIO_DEV, 0xe5, 0x0); /* no inversion */ - pnp_write_config(GPIO_DEV, 0x30, 0x9); /* Enable GPIO 2 & GPIO 5 */ + pnp_write_config(GPIO_DEV, 0xe3, 0x3); /* 0000 0011 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101110 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe1, 0x1); /* set output val */ + pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* set output val 1011 0100 */ pnp_exit_ext_func_mode(GPIO_DEV); }
-- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
