Modify the artecgroup/dbe61 dts to be equivalent to v2 Config.lb. The 
target does not yet compile due to initram breakage, but the breakage is 
really old.

Signed-off-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]>

Index: LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/dts
===================================================================
--- LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/dts    (revision 607)
+++ LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/dts    (working copy)
@@ -84,8 +84,26 @@
                [EMAIL PROTECTED],0 {
                        /config/("northbridge/amd/geodelx/pci");
                };
-               [EMAIL PROTECTED],1 {
+               [EMAIL PROTECTED],0 {
                        /config/("southbridge/amd/cs5536/dts");
+                       /* Interrupt enables for LPC bus.
+                        *  Each bit is an IRQ 0-15. */
+                       lpc_serirq_enable = "0x00001002";
+                       /* LPC IRQ polarity. Each bit is an IRQ 0-15. */
+                       lpc_serirq_polarity = "0x0000effd";
+                       /* 0:continuous 1:quiet */
+                       lpc_serirq_mode = "1";
+                       /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none. 
+                        * See virtual PIC spec. */
+                       enable_gpio_int_route = "0x0D0C0700";
+                       /* COM1 settings */
+                       com1_enable = "0";
+                       com1_address = "0x2f8";
+                       com1_irq = "3";
+                       /* COM2 settings */
+                       com2_enable = "1";
+                       com2_address = "0x3f8";
+                       com2_irq = "4";
                };
        };
 };


-- 
http://www.hailfinger.org/


-- 
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to