On 18.02.2008 18:53, Marc Jones wrote:
> ron minnich wrote:
>
>> On Feb 18, 2008 9:28 AM, Carl-Daniel Hailfinger wrote:
>>
>>
>>> The dbe61 initram code in v3 seems to be in a rather bad shape. Is there
>>> any reason we can't drop it and use the alix1c initram code as template?
>>>
>>>
>> That seems like a reasonable idea to me.
>>
>> The alix1c code is pretty flexible.
>>
>>
> The dbe61 doesn't have a SPD for the memory, so I started to go the
> table route but never got it working. I think we can figure it out from
> a working ROM. The other special thing they do is use the DDC pins on
> the VGA connector for serial. Using the alix1c initram would be a good
> place to start because it is so clean and simple.
>
I just used the alix1c initram code for the dbe61 and the patch below it
at least compiled. That's quite a bit of progress.
Regards,
Carl-Daniel
Add northbridge/amd/geodelx/raminit.c to the Artecgroup DBE61 makefile.
Completely replace DBE61 initram code by Alix.1C initram code.
svn rm mainboard/artecgroup/dbe61/initram.c
svn cp mainboard/pcengines/alix1c/initram.c mainboard/artecgroup/dbe61/initram.c
Signed-off-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]>
Index: LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/Makefile
===================================================================
--- LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/Makefile (revision 609)
+++ LinuxBIOSv3-dbe61/mainboard/artecgroup/dbe61/Makefile (working copy)
@@ -22,6 +22,7 @@
STAGE0_MAINBOARD_OBJ := $(obj)/mainboard/$(MAINBOARDDIR)/stage1.o
INITRAM_OBJ = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \
+ $(src)/northbridge/amd/geodelx/raminit.c \
$(src)/arch/x86/geodelx/geodelx.c
STAGE2_MAINBOARD_OBJ =
--
http://www.hailfinger.org/
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
