Arne,
The log looks good from the CPU side. I didn't look at the diff. When it
is ready you should submit it with a signed-off-by.
Marc
Arne Georg Gleditsch wrote:
Marc Jones <[EMAIL PROTECTED]> writes:
Please send the entire serial output with
DEFAULT_CONSOLE_LOGLEVEL=8. I would like to see if there are any
issues with the CPU init.
Here you go. My current status is as follows:
* SATA controller: works, but only if vendor BIOS is allowed to run once
after poweron. Not sure what the issue can be here, since the
controller seems to work flawlessly both in FILO and Linux when the
vendor BIOS is replaced with coreboot in flight and hard reset is
applied.
* Network controllers: work, but only with pci=nomsi kernel option.
* PCIe addon cards are not discovered.
Attached: log from (failing) poweron run and (working) post-vendor cold
reset run, as well as my diffs (initial copying of s2912 sources omitted
for brevity).
The first issue is for me the most serious one, so any pointers on how
to get that resolved would be appreciated.
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:[EMAIL PROTECTED]
http://www.amd.com/embeddedprocessors
--
coreboot mailing list
[email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
