On Thu, Sep 4, 2008 at 5:20 PM, Daniel Lindenaar <[EMAIL PROTECTED]> wrote: > hmmm it's working partly, it seems. First i did something wrong that skrewed > up the com port setup, which I fixed. I now get the debug messages I added > via the serial line, but, strangely, only when i do a (warm) reboot from a > running linux, not with a cold boot... probably something needs to be set > that doesn't get set by default on cold reboot.
Not good. Can you send me a copy of your tree or a patch, and a complete boot log? I've seen the same issue, I just can't remember how I fixed it at the moment. It's something to do with either the romcc build parameters or failover code, I can't remember atm. Also, vt8601 is compatible with both c3 and p2/p3, right? Which are you using? > > Anyway, it's the SMBus controller where things go wrong; the log says: > > SMBUS controller not found Check the datasheet, there's probably a bit somewhere in the LPC controller that enables the smbus controller, you'll need to flip that first, if you haven't already. -Corey > > as the last item. At least some progress is made. Besides the logging not > working on cold boot, which it should at some point, I've now got something > that works well enough to start proper debugging. > > regards, > Daniel >> >> -- >> coreboot mailing list >> [email protected] >> http://www.coreboot.org/mailman/listinfo/coreboot >> >> > > -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
