Daniel Lindenaar wrote:
Daniel Lindenaar wrote:Corey Osgood wrote:OK, there some small progress made. I'll send you a patch later. Here's a complete bootlog. first after a warm reboot, then after a power cycle and then after a reset.On Thu, Sep 4, 2008 at 5:20 PM, Daniel Lindenaar <[EMAIL PROTECTED]> wrote:hmmm it's working partly, it seems. First i did something wrong that skrewed up the com port setup, which I fixed. I now get the debug messages I added via the serial line, but, strangely, only when i do a (warm) reboot from a running linux, not with a cold boot... probably something needs to be setthat doesn't get set by default on cold reboot.Not good. Can you send me a copy of your tree or a patch, and a complete boot log? I've seen the same issue, I just can't remember how I fixed it at the moment. It's something to do with either the romcc build parameters or failover code, I can't remember atm. Also, vt8601 is compatible with both c3 and p2/p3, right? Which are you using?Here's the patch... Hope you can help <:)
ow I forgot the target dir... here's the new one sorry Daniel
------------------------------------------------------------------------ -- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
tk3350.patch.gz
Description: application/gzip
-- coreboot mailing list [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
