On Thu, Oct 9, 2008 at 12:11 AM, Peter Stuge <[EMAIL PROTECTED]> wrote: > > I don't see the "mainboard_pre_payload" message at all, even though > it is in alix1c/stage1.c just like alix2c3/stage1.c.
so why is it appearing at all? > You could try first without preparsing the payload, and then try a > few different payloads. What are you currently using? already tried not to preparse payload, with coreboot-v3 svn it gives the same "mainboard_pre_payload" message , just tried with buildrom: Wrote coreboot table at: 0x00000500 - 0x00000bbc checksum 3fe7 Show all devs... root(Root Device): enabled 1 have_resources 0 initialized 1 cpus: Unknown device path type: 0 cpus(): enabled 1 have_resources 0 initialized 0 apic_0(APIC: 00): enabled 1 have_resources 1 initialized 1 domain_0_pci_1_0(PCI: 00:01.0): enabled 1 have_resources 1 initialized 1 domain_0_pci_f_0(PCI: 00:0f.0): enabled 1 have_resources 1 initialized 1 domain_0_pci_f_2(PCI: 00:0f.2): enabled 1 have_resources 1 initialized 1 domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1 initialized 0 dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:01.2(PCI: 00:01.2): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:09.0(PCI: 00:09.0): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:0a.0(PCI: 00:0a.0): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:0b.0(PCI: 00:0b.0): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:0f.3(PCI: 00:0f.3): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:0f.4(PCI: 00:0f.4): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:0f.5(PCI: 00:0f.5): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:0f.6(PCI: 00:0f.6): enabled 1 have_resources 1 initialized 1 dynamic PCI: 00:0f.7(PCI: 00:0f.7): enabled 1 have_resources 1 initialized 1 Stage2 code done. LAR: Attempting to open 'normal/payload/segment0'. LAR: Start 0xfff80000 len 0x80000 LAR: seen member normal/[EMAIL PROTECTED], size 1200 LAR: seen member normal/initram/[EMAIL PROTECTED], size 5976 LAR: seen member normal/stage2/[EMAIL PROTECTED], size 1 LAR: seen member normal/stage2/[EMAIL PROTECTED], size 18500 LAR: seen member normal/stage2/[EMAIL PROTECTED], size 403 LAR: seen member normal/[EMAIL PROTECTED], size 17963 LAR: seen member blob/[EMAIL PROTECTED], size 30374 LAR: seen member [EMAIL PROTECTED], size 428671 LAR: seen member [EMAIL PROTECTED], size 20480 LAR: File not found! LAR: load_file: No such file 'normal/payload/segment0' LAR: load_file_segments: Failed for normal/payload FATAL: No usable payload found. tried with coreinfo and filo payloads (both buildrom and clean svn) what versions/revisions people with working alix.2c3 use? Roman -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
