On 09.10.2008 17:40, ron minnich wrote: > On Thu, Oct 9, 2008 at 8:30 AM, Myles Watson <[EMAIL PROTECTED]> wrote: > >>>> Very nice. Now how do we disable the 8111 nic and EHCI (like v2 does)? >>>> >>> I'm >>> >>>> still curious how that works. >>>> >>>> >>> Disable for scanning or disable once it is all scanned and address >>> space allocated? >>> >> Good question. What did the v2 disable mean? >> >> > > > so here are the cases. You might not want to scan the device, or you > might want the device to actually not be visible. > > make it not scanned, put enabled = "0" in dts. > *possibly* make it disappear, put enabled = "0" in dts but also have a > phase4_enable_disable that will look at dev->enabled and make the > magic happen. >
That disappearance trick only works only with geode right now and needs disable_vpci or somesuch set in the dts. I had a patch which allowed you to use "hidden" as a property in the dts. I can dig it up if you want. > For now, you can try > enabled = "0"; in the dts entry for the nic. > I thought it was disabled; but I'm not so sure anymore. Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
