Hello Well! That's a good thing to know...so this may be more of a research project to boot Windows using coreboot on the Geode?
How would recommend attacking this if I want to boot Windows on the GeodeLX using coreboot? Or should we just resort to those "other" bioses... I would prefer not to because we print out POST/Low-Level codes on an ASCII LCD display during bootup which is very nice for manufacturing. Thanks Steve Spano, President Finger Lakes Engineering -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marc Jones Sent: Monday, October 13, 2008 2:45 PM To: [EMAIL PROTECTED] Cc: 'Kevin O'Connor'; 'Myles Watson'; [email protected] Subject: Re: [coreboot] SeaBIOS + Windows + Coreboot Steve Spano wrote: > I will keep the list posted with my results and problems, my goal here > is to boot Windows 2000/XP/CE on the AMD Geode LX800. The Geode platform is not ideal for this exercise. The VSA used by coreboot doesn't support the VGA BIOS (only the minimal set of pci config space emulation). It is assumed that a native driver would be used. Some folks have discussed developing an open VGA BIOS for Geode but no development has been done yet. Marc -- Marc Jones Senior Firmware Engineer (970) 226-9684 Office mailto:[EMAIL PROTECTED] http://www.amd.com/embeddedprocessors -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot -- No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.8.0/1722 - Release Date: 10/13/2008 7:50 AM -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
