Ühel kenal päeval, K, 2008-11-12 kell 19:15, kirjutas Carl-Daniel
Hailfinger:
> On 12.11.2008 19:06, Mart Raudsepp wrote:
> > artecgroup/dbe61: Set up NAND and USB power handling settings
> >
> > Also upper-cases the hex in lpc_serirq_polarity as all other Geode boards
> > have it as such,
> > and remove parts of the commented out reference v2 setup block that should
> > be handled by
> > this change now.
> >
> > Oddly enough the USB power handling setting (that was to get the other pair
> > of USB
> > ports powered during DBE62 work) actually make memtest work, while without
> > it it gets
> > unexpected interrupt halts. The SPD commit earlier missed this local change
> > as an unrelated
> > one.
> >
>
> The paragraph above is a bit unclear to me. What's the relationship
> between memtest and the other pair of USB ports? Do they both work now
> or is it an "either or" decision?
New commit log message:
artecgroup/dbe61: Set up NAND and USB power handling settings
Also upper-cases the hex in lpc_serirq_polarity as all other Geode boards
have it as such,
and remove parts of the commented out reference v2 setup block that should
be handled by
this change now.
The USB power handling setting is meant to get the second pair of USB ports
to be powered
on, as this changed done by Ron to DBE62 fixed DBE62's third and fourth USB
port to be usable.
Oddly the USB power handling setting also makes memtest work, while without
it memtest gets
unexpected interrupt halts right after it loads up.
> > Signed-off-by: Mart Raudsepp <[EMAIL PROTECTED]>
> >
>
> With an improved working of the commit message, this is
> Acked-by: Carl-Daniel Hailfinger <[EMAIL PROTECTED]>
r1006
Regards,
Mart Raudsepp
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
