2008/12/30 Paul Menzel <[email protected]>: > Dear Christian, > [I added the list again.] > > > Am Dienstag, den 30.12.2008, 16:09 +0100 schrieb Christian Ruppert: >> 2008/12/30 Paul Menzel <[email protected]>: > >> > Am Dienstag, den 30.12.2008, 15:27 +0100 schrieb Christian Ruppert: >> > >> >> here is 'lspci -tvnn'. >> >> additional cards are marked with PCIE CARD at the begin of line, rest >> >> should be onboard. >> >> i hope it help :) >> >> >> >> -[0000:00]-+-00.0 nVidia Corporation MCP55 Memory Controller [10de:0369] >> >> +-01.0 nVidia Corporation MCP55 LPC Bridge [10de:0360] >> >> +-01.1 nVidia Corporation MCP55 SMBus [10de:0368] >> >> +-02.0 nVidia Corporation MCP55 USB Controller [10de:036c] >> >> +-02.1 nVidia Corporation MCP55 USB Controller [10de:036d] >> >> +-04.0 nVidia Corporation MCP55 IDE [10de:036e] >> >> +-05.0 nVidia Corporation MCP55 SATA Controller [10de:037f] >> >> +-05.1 nVidia Corporation MCP55 SATA Controller [10de:037f] >> >> +-05.2 nVidia Corporation MCP55 SATA Controller [10de:037f] >> >> +-06.0-[0000:01]----0b.0 Texas Instruments TSB43AB22/A >> >> IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] >> >> +-06.1 nVidia Corporation MCP55 High Definition Audio >> >> [10de:0371] >> >> +-08.0 nVidia Corporation MCP55 Ethernet [10de:0373] >> >> +-09.0 nVidia Corporation MCP55 Ethernet [10de:0373] >> >> PCIE CARD +-0a.0-[0000:02]----00.0 nVidia Corporation G70 >> >> [GeForce 7600 GT] [10de:0391] >> >> +-0e.0-[0000:03]-- >> >> PCIE CARD +-0f.0-[0000:04]----00.0 nVidia Corporation G70 >> >> [GeForce 7600 GT] [10de:0391] >> >> +-18.0 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] >> >> HyperTransport Technology Configuration [1022:1100] >> >> +-18.1 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] >> >> Address Map [1022:1101] >> >> +-18.2 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] >> >> DRAM Controller [1022:1102] >> >> \-18.3 Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] >> >> Miscellaneous Control [1022:1103] >> > >> > Thank you. I guess you are referring to [1]. >> > >> > Is it possible that you can test patches to complete the port? > >> of course! >> i'd love to help but i have to buy some things before (empty chip, >> nullmodem cable etc.). >> i don't want break my desktop :D > > That is a good idea. We will be glad to hear from you, when you got your > stuff and you are all setup. Santa must have been distracted that he did > not get these things for you for Christmas. ;-) > >> yep refer to [1]. > >> > [1] http://www.coreboot.org/pipermail/coreboot/2007-October/026410.html > > > Thanks, > > Paul > > > PS: Christian, are you knew to the project? If yes and you have time, > could you tell us if you could find everything on the project's Web site > or could something be improved by for example rearranging or putting > into the FAQ? > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot >
ok.. i've my backup ICs, PLCC extractor and a nullmodem cable :) first test failed :/ i've used the lastest svn rev. with the m2n-sli-deluxe patch, as payload i've defined /dev/zero (because i just want test the bios before i test everything else). after poweron followed directly and automatic a poweroff so i think it isn't right. i tried it again and no poweroff but a black screen (i use a PCIE graphics card here with DVI dunno if that makes any differences). it would be fine if we could get together in #coreboot :) -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
