If fid_multiplier is 0, it doesn't seem to have any sense. So I agree. Acked-by: zheng bao <[email protected]>
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Marc Jones Sent: Tuesday, January 06, 2009 9:26 AM To: Rudolf Marek; Bao, Zheng Cc: Carl-Daniel Hailfinger; Coreboot Subject: Re: [coreboot] AMD DBM690T PowerNow table problems On Sat, Jan 3, 2009 at 3:04 PM, Rudolf Marek <[email protected]> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi, > > Here we go. > > Its seems that the generated table has wrong conversion for frequency and its > FID representation. In other words the table is OK but the first field is not > consistent with FID and real freq. > > invalid freq entries 1000000 kHz vs. 800000 > > This means that: > > > Package (0x06) > { > 0x00000320,. <--- here should be 0x3e8 > 0x0000F230,. > 0x00000064,. > 0x00000007,. > 0xE8202F0A,. > 0x0000030A > },. > > Package (0x06) > { > 0x00000320,. > 0x0000BB8C,. > 0x00000064,. > 0x00000007,. > 0xE8202C82,. > 0x00000482 > } > > > FID is 0A and 02 which means it should be: set to 0x3e8 and 0x320. > > I guess it is because your CPU is revF and not revG. > > fid_multiplier = ((cpuid1.edx & 0x40) >> 6) * 100; > > This line will cause that your CPU has fid_multiplier 0 instead of 100x. > I believe that the multiplier should be always 100. Because revF CPU hav LSB in > FID always 0. > > Rudolf I agree with this analysis. Patch attached. Marc -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot

