On 08.01.2009 17:52, Marc Jones wrote: > On Wed, Jan 7, 2009 at 7:34 PM, Carl-Daniel Hailfinger > <[email protected]> wrote: > >> On 06.01.2009 17:47, Marc Jones wrote: >> >>> On Mon, Jan 5, 2009 at 6:36 PM, Bao, Zheng <[email protected]> wrote: >>> >>> >>>> If fid_multiplier is 0, it doesn't seem to have any sense. So I agree. >>>> >>>> Acked-by: zheng bao <[email protected]> >>>> >>>> >>>> >>> I also fixed this in acpi_tables.c Pistachio. >>> >>> r 3847 >>> >>> >> Thanks! >> The Linux kernel powernow-k8 driver doesn't complain anymore, but now >> the machine will lock up or reboot once I put some load on it. >> Blacklisting the powernow-k8 driver avoids the issue, but that makes >> frequency scaling impossible. >> >> AFAICS the standard cpu frequency governor is ondemand and it scales the >> frequency down from 1800 MHz to 1000 Mhz. That seems to work fine, but >> scaling up again will cause the lockups/reboots. By the way, coreboot >> reports a BIST failure after such reboots. Not nice. >> >> Rudolf's PowerNow tables had entries for 1000/1600/1800 MHz. The >> proprietary BIOS and coreboot only have entries for 1000/1800 MHz. >> According to the docs, scaling from 1000 MHz to 1800 MHz can't be done >> in a single step. Is that maybe the reason for the problems I'm seeing? >> > > > Can you dump the current tables or can you not get that far before a > crash? The entries are end points and the driver takes care of the > stepping that needs to be done to get to those points. We need to > check that the table generated the correct vid setting for the fid. It > is well described in the bkdg section 10.6. >
I managed to boot fine with the proprietary BIOS, blacklisted the k8-powernow driver and rebooted with coreboot. Attached are the following files: _PSS with coreboot (crash) _PSS with proprietary BIOS (ok) If I combine the _PSS from the proprietary BIOS with the other tables from coreboot, the machine does not crash. I'll try to narrow it down further. Regards, Carl-Daniel -- http://www.hailfinger.org/ -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot

