Hi,
With Coreboot and ACPI the interrupt gets routed to IRQ 0, even though
I put 18 in the _PRT table. X loads more quickly, but there are
obvious problems with text highlighting.
This is OK, just the PCI line reg is not initialized. Its used only when the
routing of PCI is done via 8259. Check
http://www.coreboot.org/ACPI_in_coreboot#acpi_fill_madt
There is some pics which explains that.
In none of the three cases can I find the IRQ listed in
/proc/interrupts. I would have expected to see it there.
It means that the driver is not using any interrupts Maybe you need to load the
"nvidia" proprietary module.
Rudolf
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
