Myles, Please find attached patches to restore the functionality of the EPIA-N(L)/CN400 build, after the recent change to CBFS. This patch fixes the build for loading VGA/BOCHS during VGA Init.
I've tested this against R4553 and EPIA-NL8000EG. Features Tested as Working using FILO 0.6.0 Payload launching Fedora Core 9 (2.6.25 kernel):: VGA Console / X SATA (As Boot device) PATA CDROM (Autodetect/Mount/Eject all seem to work) USB (keyboard, mouse and USB Flash Disk) Networking ACPI (S0/S5 Soft-off Works OK, Linux PM Seems to be working, PCI IRQ Routing) IOAPIC/LAPIC Legacy Keyboard/Mouse have NOT been tested, but should work based on existing VT8237R work. Boots to FILO in ~1 second. FILO USB Keyboard/Mouse Support tested as working. I've also attached a log of the boot console output. cn400-src-v9.patch should be applied at src level cn400-targets-v9.patch should be applied at targets level Signed-off-by: Jon Harrison <[email protected]> PS The change itself is a bit of a hack to get things up and running again. Discussions with Patrick suggest that the way that I'm doing the VGA Init, based on the rather elderly epia-m build, is obsolete/anachronistic as there is stuff in the core functionality to the same job perhaps a bit more cleanly. I don't really have the time at the moment to sort this out, perhaps someone else will have a look if a working build is out there ? > -----Original Message----- > From: Myles Watson [mailto:[email protected]] > Sent: 18 August 2009 16:14 > To: Harrison, Jon (SELEX GALILEO, UK); [email protected] > Subject: RE: [coreboot] build service results for r4549 > > *** WARNING *** > > This message has originated outside your organisation, > either from an external partner or the Global Internet. > Keep this in mind if you answer this message. > > > > Looks like files got patched but new files didn't get added. > > Yep. Sorry I botched it. > > Rev 4550. > > Thanks, > Myles > > > SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ********************************************************************
cn400-src-v9.patch
Description: cn400-src-v9.patch
cn400-targets-v9.patch
Description: cn400-targets-v9.patch
coreboot-2.0.0-r4553M-epia_n-fallback Wed Aug 19 13:41:34 BST 2009 booting... APIC: 00 missing read_resources Initializing CPU #0 Keyboard controller output buffer result timeout Keyboard selftest failed ACK: 0xfe FILO version 0.6.0 ([email protected]) Thu Aug 6 18:49:24 BST 2009 00:10.0 3038:1106.0 UHCI controller lowspeed device maxPacketSize0: 8 device version: 1.10 device has 1 configurations device has 1 interfaces #0 has 1 endpoints, interface 3:1, protocol 1 #1: Endpoint 1 (in), max packet size 8, type interrupt device of class 3 found HID found supports boot interface.. it's a keyboard configuring... activating... found endpoint 1 for interrupt-in configuration done. lowspeed device maxPacketSize0: 8 device version: 2.0 device has 1 configurations device has 1 interfaces #0 has 1 endpoints, interface 3:1, protocol 2 #1: Endpoint 1 (in), max packet size 4, type interrupt device of class 3 found HID found supports boot interface.. it's a mouse 00:10.1 3038:1106.1 UHCI controller 00:10.2 3038:1106.2 UHCI controller 00:10.3 3038:1106.3 UHCI controller 00:10.4 3104:1106.4 EHCI controller ERROR: No such CMOS option (boot_devices) menu: hda1:/filo/menu.lst Initializing cgroup subsys cpu Linux version 2.6.25 ([email protected]) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #2 SMP Wed Jul 29 18:48:20 BS T 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000001000 type 16 BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000003bff0000 (usable) BIOS-e820: 000000003bff0000 - 000000003c000000 type 16 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 63MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f0430] 000f0430 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 245744) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 245744 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 245744 On node 0 totalpages: 245744 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 127 pages used for memmap HighMem zone: 16241 pages, LIFO batch:3 Movable zone: 0 pages used for memmap DMI not present or invalid. Using APIC driver default ACPI: RSDP 000F0400, 0014 (r0 CORE ) ACPI: RSDT 3BFF0424, 002C (r1 CORE COREBOOT 0 CORE 0) ACPI: FACP 3BFF16BC, 00F4 (r4 COREBO COREBOOT 0 CORE 2A) ACPI: DSDT 3BFF04C0, 11FC (r1 CBT-V2 CBT-DSDT 1 INTL 20061109) ACPI: FACS 3BFF0480, 0040 ACPI: APIC 3BFF17B0, 005A (r1 CORE COREBOOT 0 CORE 0) ACPI: no DMI BIOS year, acpi=force is required to enable ACPI ACPI: acpi=force override ACPI: PM-Timer IO Port: 0x508 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:9 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243825 Kernel command line: ro root=/dev/sda5 acpi=force console=ttyS0,115200n8 debug mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07be000 soft=c079e000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 800.049 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 966652k/982976k available (2236k kernel code, 15676k reserved, 1141k data, 284k init, 65472k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0754000 - 0xc079b000 ( 284 kB) .data : 0xc062f3ad - 0xc074c800 (1141 kB) .text : 0xc0400000 - 0xc062f3ad (2236 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 1603.69 BogoMIPS (lpj=801849) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 64K (32 bytes/line) Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 20k freed ACPI: Core revision 20070126 CPU0: Centaur VIA Nehemiah stepping 0a Total of 1 processors activated (1603.69 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=3728 bytes CPU0 attaching sched-domain: domain 0: span 00000001 groups: 00000001 net_namespace: 548 bytes Booting paravirtualized kernel on bare hardware Time: 13:43:40 Date: 08/19/09 NET: Registered protocol family 16 No dock devices found. ACPI FADT declares the system doesn't support MSI, so disable it ACPI: bus type pci registered PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [ATAI] (IRQs *20) ACPI: PCI Interrupt Link [USBI] (IRQs *21) ACPI: PCI Interrupt Link [VT8I] (IRQs *22), disabled. ACPI: PCI Interrupt Link [NICI] (IRQs *23) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 7 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:12.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 system 00:06: ioport range 0x4d0-0x4d1 has been reserved system 00:06: ioport range 0x294-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: 0xf4000000-0xf5ffffff PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 2599k freed apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1250689420.323:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: VIA PCI bridge detected. Disabling DAC. pci 0000:01:00.0: Boot video device pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: ACPI0007:00 is registered as cooling_device0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset agpgart: AGP aperture is 128M @ 0xe8000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 i8042 kbd: probe of 00:01 failed with error -16 i8042 aux: probe of 00:00 failed with error -16 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid /usr/src/redhat/BUILD/kernel-2.6.25/linux-2.6.25.i386/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 5:502:736 Freeing unused kernel memory: 284k freed Write protecting the kernel read-only data: 928k Red Hat nash version 6.0.52 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading ehci-hcd module ACPI: PCI Interrupt Link [USBI] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [USBI] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xf6000000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 Loading ohci-hcd module ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver Loading uhci-hcd module USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [USBI] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [USBI] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [USBI] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [USBI] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25 uhci_hcd usb usb5: SerialNumber: 0000:00:10.3 Loading ext2 module Loading scsi_mod module usb 2-1: new low speed USB device using uhci_hcd and address 2 SCSI subsystem initialized Loading sd_mod module Driver 'sd' needs updating - please use bus_type methods Loading libata module libata version 3.00 loaded. Loading sata_via module usb 2-1: configuration #1 chosen from 1 choice sata_via 0000:00:0f.0: version 2.3 ACPI: PCI Interrupt Link [ATAI] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ATAI] -> GSI 20 (level, low) -> IRQ 20 input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input1 sata_via 0000:00:0f.0: routed to hard irq line 11 input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:10.0-1 usb 2-1: New USB device found, idVendor=03f0, idProduct=0024 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: HP Basic USB Keyboard usb 2-1: Manufacturer: CHICONY scsi0 : sata_via scsi1 : sata_via ata1: SATA max UDMA/133 cmd 0x1420 ctl 0x1430 bmdma 0x1400 irq 20 ata2: SATA max UDMA/133 cmd 0x1428 ctl 0x1434 bmdma 0x1408 irq 20 usb 2-2: new low speed USB device using uhci_hcd and address 3 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) usb 2-2: configuration #1 chosen from 1 choice ata1.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133 ata1.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input2 input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2 usb 2-2: New USB device found, idVendor=046d, idProduct=c03d usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: USB-PS/2 Optical Mouse usb 2-2: Manufacturer: Logitech ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.AL PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 > sda4 sd 0:0:0:0: [sda] Attached SCSI disk Waiting for driver initialization. Loading pata_acpi module ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ATAI] -> GSI 20 (level, low) -> IRQ 20 ACPI: PCI interrupt for device 0000:00:0f.1 disabled Waiting for driver initialization. Loading ata_generic module Trying to resume from /dev/sda2 No suspend signature on swap, not resuming. Creating root device. Mounting root filesystem. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1250689429.105:2): selinux=0 auid=4294967295 ses=4294967295 Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: [ OK ] Setting hostname localhost.localdomain: [ OK ] No devices found Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext2 (1) -- /] fsck.ext2 -a /dev/sda5 /: clean, 480505/1052640 files, 3040762/4205005 blocks [/sbin/fsck.ext2 (1) -- /boot] fsck.ext2 -a /dev/sda1 /boot: clean, 43/26104 files, 16516/104388 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup ip6tables: Applying firewall rules: [ OK ] iptables: Applying firewall rules: [ OK ] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Starting system message bus: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting acpi daemon: [ OK ] Starting HAL daemon: [ OK ] Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] Starting Bluetooth services:[ OK ] Starting sshd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting crond: [ OK ][ OK ] Starting kerneloops:[ OK ] Starting atd: [ OK ] Starting Avahi daemon... [ OK ] Starting cups: [ OK ] Starting anacron: [ OK ] Fedora release 9 (Sulphur) Kernel 2.6.25 on an i686 (/dev/ttyS0) localhost.localdomain login:
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
