Yes. Here is the output: coreboot-2.3 Tue Oct 20 14:42:33 MDT 2009 starting... Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done SBLink=00 NC node|link=00 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8075 pos=0x8a, filtered freq_cap=0x35 pos=0xce, unfiltered freq_cap=0x35 freq_cap1=0x35, freq_cap2=0x15 dev1 old_freq=0x0, freq=0x4, needs_reset=0x1 dev2 old_freq=0x0, freq=0x4, needs_reset=0x1 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 entering ht_optimize_link pos=0xd2, unfiltered freq_cap=0x35 pos=0xce, unfiltered freq_cap=0x1 pos=0xce, filtered freq_cap=0x1 freq_cap1=0x15, freq_cap2=0x1 dev1 old_freq=0x0, freq=0x0, needs_reset=0x0 dev2 old_freq=0x0, freq=0x0, needs_reset=0x0 width_cap1=0x0, width_cap2=0x0 dev1 input ln_width1=0x3, ln_width2=0x3 dev1 input width=0x0 dev1 output ln_width1=0x3, ln_width2=0x3 dev1 input|output width=0x0 old dev1 input|output width=0x0 dev2 input|output width=0x0 old dev2 input|output width=0x0 ht reset -
coreboot-2.3 Tue Oct 20 14:42:33 MDT 2009 starting... Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done SBLink=00 NC node|link=00 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8075 pos=0x8a, filtered freq_cap=0x35 pos=0xce, unfiltered freq_cap=0x35 freq_cap1=0x35, freq_cap2=0x15 dev1 old_freq=0x4, freq=0x4, needs_reset=0x0 dev2 old_freq=0x4, freq=0x4, needs_reset=0x0 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 entering ht_optimize_link pos=0xd2, unfiltered freq_cap=0x35 pos=0xce, unfiltered freq_cap=0x1 pos=0xce, filtered freq_cap=0x1 freq_cap1=0x15, freq_cap2=0x1 dev1 old_freq=0x0, freq=0x0, needs_reset=0x0 dev2 old_freq=0x0, freq=0x0, needs_reset=0x0 width_cap1=0x0, width_cap2=0x0 dev1 input ln_width1=0x3, ln_width2=0x3 dev1 input width=0x0 dev1 output ln_width1=0x3, ln_width2=0x3 dev1 input|output width=0x0 old dev1 input|output width=0x0 dev2 input|output width=0x0 old dev2 input|output width=0x0 SMBus controller enabled Ram1.00 setting up CPU00 northbridge registers done. Ram2.00 Enabling dual channel memory Registered 166Mhz RAM end at 0x00100000 kB Lower RAM end at 0x00100000 kB Ram3 -- Hugh Greenberg Myles Watson wrote:
On Tue, Oct 20, 2009 at 2:01 PM, Hugh Greenberg <[email protected] <mailto:[email protected]>> wrote:Oops. I did miss a big chunk of the log :). I thought it was part of the previous output. Here is the full log: OK. That looks better. Now did you try applying no_smp.diff? Thanks, Myles
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
