Hi All
I have attached the YABEL output.
Even though coreboot does only the hardware initialization, it has to do a
VGA rom init for payloads other than seabios?
I my case I was planning to use FILO as payload to boot Linux. FILO doesn't
do any VGA init.
> -----Original Message-----
> From: Joseph Smith [mailto:[email protected]]
> Sent: Friday, October 30, 2009 6:22 PM
> To: [email protected]
> Cc: coreboot
> Subject: Re: [coreboot] Error executing VGA ROM with coreboot
> Importance: Low
>
>
>
>
> On Fri, 30 Oct 2009 17:32:03 +0530 (IST), [email protected] wrote:
> >>
> >>
> >>
> >> On Fri, 30 Oct 2009 10:11:36 +0530, "Mansoor"
> <[email protected]>
> >> wrote:
> >>>
> >>>
> >>>> -----Original Message-----
> >>>> From: Joe [mailto:[email protected]]
> >>>> Sent: Thursday, October 29, 2009 7:32 PM
> >>>> To: Mansoor
> >>>> Cc: 'coreboot'
> >>>> Subject: Re: [coreboot] Error executing VGA ROM with coreboot
> >>>>
> >>>> On 10/29/2009 07:38 AM, Mansoor wrote:
> >>>> > Hi
> >>>> >
> >>>> > I keep getting "ILLEGAL EXTENDED X86 OPCODE!" from my VGA ROM while
> >>>> > trying run VGA ROM in coreboot.
> >>>> >
> >>>> > I tried x86emu, yabel and real mode for running VGA ROM with no
> luck.
> >>>> > But the same VGA ROM is running with seabios.
> >>>> >
> >>>> > I am attaching the boot logs with x86emu, real mode and with
> seabios.
> >>>> >
> >>>> > Any help?
> >>>> >
> >>>> > What is the big difference while executing VGA ROM in coreboot and
> >>>> seabios?
> >>>> >
> >>>> > Why coreboot can't run a VGA ROM which seabios can?
> >>>> >
> >>>> Hmm looks like your getting Unexpected Exception errors. Something is
> >>>> not initializing correctly. Memory maybe?
> >>>
> >>> I don't think so, because with seabios I am able to load Linux in GUI
> >> mode.
> >>> Only with coreboot I am facing these issues for initializing VGA ROM.
> >>>
> >>>
> >> You could always try Debugging the Unexpected Exception errors with
GDB,
> >> this may give you a clue on what the problem is.
> >>
> >> http://www.coreboot.org/Debugging
> >
> > Actually i tried GDB and failed to build the image.. I got section
> > overlap error and was not able to solve it.
> >
> > What i didnt understand is
> >
> > Why coreboot can't run a VGA ROM which seabios can?
> > What is the big difference while executing VGA ROM in coreboot and
> > seabios?
> >
> > From the log you can see seabios emits some warning messages(fail
> > handle_155fXX) but still it continues to run the VGA ROM, where x86emu
> or
> > realmode hangs with error messages
> >
> > in seabios
> > fail handle_155fXX:23(86):
> >
> > a=a0005f38 b=000008c1 c=00000003 d=0000c000 ds=a000 es=c000
> ss=a000
> >
> > si=00000000 di=00000003 bp=000077cc sp=000077be cs=c000 ip=3115
> f=0002
> >
> > Real mode
> >
> > Real mode stub @00000500: 422 bytes
> >
> > Calling Option ROM...
> >
> > oprom: INT# 0x8e41a854
> >
> > oprom: eax: 8a000885 ebx: 0e21e039 ecx: 00028101 edx: 2989b606
> >
> > oprom: ebp: 58000a58 esp: c0010004 edi: c668404c esi: c2650304
> >
> > oprom: ip: e6b0 cs: 8831 flags: 00002900
> >
> > Unexpected Exception: 6 @ 10:f6fdd07d - Halting
> >
> > Code: 0 eflags: 00010012
> >
> > eax: 00007776 ebx: 00008831 ecx: 0010ef73 edx: 001059b1
> >
> > edi: c0010004 esi: 8e41a854 ebp: 00002900 esp: 0000774a
> >
> well lets see,
> The coreboot rom emulators are completely different beasts than seabios.
> Perhaps you take a look at the differences in the interrupt handlers to
> find out the differences?
>
> I would suggest running YABEL in full DEBUG mode, YABEL is able to output
> rom PCI accesses, io accesses, interrupt calls etc. I would also suggest
> if
> you do this to output your bootlog to a text file in minicom, because it
> may run for several hours and get quite large. I would be glad to take a
> look at it and see if I can see what is going on.
>
> --
> Thanks,
> Joseph Smith
> Set-Top-Linux
> www.settoplinux.org
>
>
> --------------------------------------------------------------------------
> -----
> DISCLAIMER: This e-mail and any attachment (s) is for authorised use by
> the
> intended recipient (s) only. It may contain proprietary material,
> confidential
> information and/or be subject to the legal privilege of iWave Systems
> Technologies Private Limited. If you have received this message in error,
> please notify the originator immediately. If you are not the intended
> recipient, you are notified that you are strictly prohibited from
> retaining,
> using, copying, alerting or disclosing the content of this message. Thank
> you
> for your co-operation.
> --------------------------------------------------------------------------
> ----
-------------------------------------------------------------------------------
DISCLAIMER: This e-mail and any attachment (s) is for authorised use by the
intended recipient (s) only. It may contain proprietary material, confidential
information and/or be subject to the legal privilege of iWave Systems
Technologies Private Limited. If you have received this message in error,
please notify the originator immediately. If you are not the intended
recipient, you are notified that you are strictly prohibited from retaining,
using, copying, alerting or disclosing the content of this message. Thank you
for your co-operation.
------------------------------------------------------------------------------
Check pci8086,8108.rom
In cbfs, rom address for PCI: 00:02.0 = fff00038
On mainboard, rom address for PCI: 00:02.0 = fff00038
PCI Expansion ROM, signature 0xaa55, INIT size 0x10000, data ptr 0x001c
PCI ROM Image, Vendor 8086, Device 8108,
PCI ROM Image, Class Code 030000, Code Type 00
copying VGA ROM Image from fff00038 to 0xc0000, 0x10000 bytes
biosemu_dev_init
bus: 0, devfn: 10
biosemu_dev_get_addr_info: VGA device found, adding legacy resources...
translate_address_array:
0: info: 60000200 bus: 00 devfn: 10 cfg_space_offset: 10
addr: 00000000f0000000
offs: 0000000000000000
size: 0000000000080000
1: info: 60000100 bus: 00 devfn: 10 cfg_space_offset: 14
addr: 000000000000f070
offs: 0000000000000000
size: 0000000000000008
2: info: 60000200 bus: 00 devfn: 10 cfg_space_offset: 18
addr: 00000000e0000000
offs: 0000000000000000
size: 0000000010000000
3: info: 60000200 bus: 00 devfn: 10 cfg_space_offset: 1c
addr: 00000000f0080000
offs: 0000000000000000
size: 0000000000040000
4: info: e0002200 bus: 00 devfn: 10 cfg_space_offset: 30
addr: 00000000fff00000
offs: 0000000000000000
size: 0000000000000000
5: info: 00002200 bus: 00 devfn: 10 cfg_space_offset: 30
addr: 00000000fff00038
offs: 0000000000000000
size: 0000000000000000
6: info: 80000100 bus: 00 devfn: 10 cfg_space_offset: 00
addr: 00000000000003b0
offs: 0000000000000000
size: 000000000000000c
7: info: 80000100 bus: 00 devfn: 10 cfg_space_offset: 00
addr: 00000000000003c0
offs: 0000000000000000
size: 0000000000000020
8: info: 80000200 bus: 00 devfn: 10 cfg_space_offset: 00
addr: 00000000000a0000
offs: 0000000000000000
size: 0000000000020000
PCI Device ID: 8108, PCI Vendor ID: 8086
PCI Data Structure @c001c:
dump(00157b18, 18):
00157b18: 50 43 49 52 86 80 08 81 PCIR....
00157b20: 00 00 18 00 00 00 00 03 ........
00157b28: 80 00 00 00 00 80 00 00 ........
Image Length: 65536
Image Code Type: 0
executing rom_image from 000c0000
biosmem at 01000000
Image Size: 65536
membase set: 01000000, size: 00100000
0:0 my_wrl: write to Interrupt Vector 10 <-- f000f065
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ff065 <-- cf
0:0 my_wrl: write to Interrupt Vector 11 <-- f000f84d
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ff84d <-- cf
0:0 my_wrl: write to Interrupt Vector 12 <-- f000f841
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ff841 <-- cf
0:0 my_wrl: write to Interrupt Vector 13 <-- f000ec59
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fec59 <-- cf
0:0 my_wrl: write to Interrupt Vector 14 <-- f000e739
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fe739 <-- cf
0:0 my_wrl: write to Interrupt Vector 15 <-- f000f859
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ff859 <-- cf
0:0 my_wrl: write to Interrupt Vector 16 <-- f000e82e
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fe82e <-- cf
0:0 my_wrl: write to Interrupt Vector 17 <-- f000efd2
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fefd2 <-- cf
0:0 my_wrl: write to Interrupt Vector 1a <-- f000fe6e
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffe6e <-- cf
0:0 my_wrw: write to BIOS Data Area: addr: 413 <-- 400
0:0 my_wrw: write to BIOS Data Area: addr: 40e <-- f600
0:0 my_wrw: write to Extended BIOS Data Area f600h, size: 0000: addr: f6000 <--
1
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffff5 <-- 30
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffff6 <-- 36
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffff7 <-- 2f
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffff8 <-- 31
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffff9 <-- 31
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffffa <-- 2f
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffffb <-- 39
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffffc <-- 39
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fffd9 <-- 50
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fffda <-- 43
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fffdb <-- 49
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fffdc <-- 5f
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fffdd <-- 49
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fffde <-- 53
0:0 my_wrb: write to BIOS Data Segment f000h: addr: fffdf <-- 41
0:0 my_wrb: write to BIOS Data Segment f000h: addr: ffffe <-- fc
0:0 PMM Structure:
dump(010f0000, 13):
010f0000: 24 50 4d 4d 01 10 e1 10 $PMM....
010f0008: 00 00 f0 00 00 00 00 00 ........
010f0010: cd fc cb ...
0:0 my_wrw: write to segment 0000h: addr: fffe <-- 1
0:0 my_wrl: write to segment 0000h: addr: fffa <-- deadbeef
0:0 my_wrl: write to segment 0000h: addr: fff6 <-- 10
0:0 my_wrw: write to segment 0000h: addr: fff4 <-- 0
0:0 my_wrl: write to segment 0000h: addr: fff0 <-- 0
0:0 my_rdl: read from segment 0000h: addr: fff0 --> 0
0:0 my_rdw: read from segment 0000h: addr: fff4 --> 0
0:0 my_rdl: read from segment 0000h: addr: fff6 --> 10
0:0 my_rdl: read from segment 0000h: addr: fffa --> deadbeef
0:0 my_rdw: read from segment 0000h: addr: fffe --> 1
0:0 pmm_handleInt: pmmAllocate: Length: 100, Handle: deadbeef, Flags: 1
0:0 pmm_handleInt: next_offset: 0x100
0:0 pmm_handleInt: align: 0x10
0:0 pmm_handleInt: pmmAllocate: allocated memory at 40000100
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: 100
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: allocated memory at: 4000:0100
0:0 my_wrl: write to segment 0000h: addr: ffec <-- deadbeef
0:0 my_wrw: write to segment 0000h: addr: ffea <-- 1
0:0 my_wrl: write to segment 0000h: addr: ffe6 <-- 0
0:0 my_rdl: read from segment 0000h: addr: ffe6 --> 0
0:0 my_rdw: read from segment 0000h: addr: ffea --> 1
0:0 my_rdl: read from segment 0000h: addr: ffec --> deadbeef
0:0 pmm_handleInt: pmmFind: Handle: deadbeef
0:0 pmm_handleInt: pmmFind: found allocated memory at 0
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: 100
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: found memory at: 4000:0100 (expected: 40000100)
0:0 my_wrl: write to segment 0000h: addr: ffe2 <-- 40000100
0:0 my_wrw: write to segment 0000h: addr: ffe0 <-- 2
0:0 my_wrl: write to segment 0000h: addr: ffdc <-- 0
0:0 my_rdl: read from segment 0000h: addr: ffdc --> 0
0:0 my_rdw: read from segment 0000h: addr: ffe0 --> 2
0:0 my_rdl: read from segment 0000h: addr: ffe2 --> 40000100
0:0 pmm_handleInt: pmmDeallocate: PMM segment offset: 100
0:0 0: deadbeef
0:0 pmm_handleInt: pmmDeallocate: found allocated memory at index: 0
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: 0
offset: 0
length: 0
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: freed memory rval: 0000:0000 (expected: 0000:0000)
0:0 my_wrw: write to segment 0000h: addr: ffda <-- 1
0:0 my_wrl: write to segment 0000h: addr: ffd6 <-- deadbeef
0:0 my_wrl: write to segment 0000h: addr: ffd2 <-- 101
0:0 my_wrw: write to segment 0000h: addr: ffd0 <-- 0
0:0 my_wrl: write to segment 0000h: addr: ffcc <-- 0
0:0 my_rdl: read from segment 0000h: addr: ffcc --> 0
0:0 my_rdw: read from segment 0000h: addr: ffd0 --> 0
0:0 my_rdl: read from segment 0000h: addr: ffd2 --> 101
0:0 my_rdl: read from segment 0000h: addr: ffd6 --> deadbeef
0:0 my_rdw: read from segment 0000h: addr: ffda --> 1
0:0 pmm_handleInt: pmmAllocate: Length: 1010, Handle: deadbeef, Flags: 1
0:0 pmm_handleInt: next_offset: 0x100
0:0 pmm_handleInt: align: 0x10
0:0 pmm_handleInt: pmmAllocate: allocated memory at 40000100
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: 1010
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: allocated memory at: 4000:0100
0:0 my_wrw: write to segment 0000h: addr: ffca <-- 5
0:0 my_wrl: write to segment 0000h: addr: ffc6 <-- f00d4b0b
0:0 my_wrl: write to segment 0000h: addr: ffc2 <-- 80
0:0 my_wrw: write to segment 0000h: addr: ffc0 <-- 0
0:0 my_wrl: write to segment 0000h: addr: ffbc <-- 0
0:0 my_rdl: read from segment 0000h: addr: ffbc --> 0
0:0 my_rdw: read from segment 0000h: addr: ffc0 --> 0
0:0 my_rdl: read from segment 0000h: addr: ffc2 --> 80
0:0 my_rdl: read from segment 0000h: addr: ffc6 --> f00d4b0b
0:0 my_rdw: read from segment 0000h: addr: ffca --> 5
0:0 pmm_handleInt: pmmAllocate: Length: 800, Handle: f00d4b0b, Flags: 5
0:0 pmm_handleInt: next_offset: 0x1110
0:0 pmm_handleInt: align: 0x800
0:0 pmm_handleInt: pmmAllocate: allocated memory at 40001800
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: 1010
0:0 1:
handle: f00d4b0b
offset: 1800
length: 800
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: allocated memory at: 4000:1800
0:0 my_wrl: write to segment 0000h: addr: ffb8 <-- f00d4b0b
0:0 my_wrw: write to segment 0000h: addr: ffb6 <-- 1
0:0 my_wrl: write to segment 0000h: addr: ffb2 <-- 0
0:0 my_rdl: read from segment 0000h: addr: ffb2 --> 0
0:0 my_rdw: read from segment 0000h: addr: ffb6 --> 1
0:0 my_rdl: read from segment 0000h: addr: ffb8 --> f00d4b0b
0:0 pmm_handleInt: pmmFind: Handle: f00d4b0b
0:0 pmm_handleInt: pmmFind: found allocated memory at 0
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: 1010
0:0 1:
handle: f00d4b0b
offset: 1800
length: 800
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 my_wrl: write to segment 0000h: addr: ffae <-- 40001800
0:0 my_wrw: write to segment 0000h: addr: ffac <-- 2
0:0 my_wrl: write to segment 0000h: addr: ffa8 <-- 0
0:0 my_rdl: read from segment 0000h: addr: ffa8 --> 0
0:0 my_rdw: read from segment 0000h: addr: ffac --> 2
0:0 my_rdl: read from segment 0000h: addr: ffae --> 40001800
0:0 pmm_handleInt: pmmDeallocate: PMM segment offset: 1800
0:0 0: deadbeef
0:0 1: f00d4b0b
0:0 pmm_handleInt: pmmDeallocate: found allocated memory at index: 1
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: 1010
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: freed memory rval: 0000:0000 (expected: 0000:0000)
0:0 my_wrl: write to segment 0000h: addr: ffa4 <-- deadbeef
0:0 my_wrw: write to segment 0000h: addr: ffa2 <-- 1
0:0 my_wrl: write to segment 0000h: addr: ff9e <-- 0
0:0 my_rdl: read from segment 0000h: addr: ff9e --> 0
0:0 my_rdw: read from segment 0000h: addr: ffa2 --> 1
0:0 my_rdl: read from segment 0000h: addr: ffa4 --> deadbeef
0:0 pmm_handleInt: pmmFind: Handle: deadbeef
0:0 pmm_handleInt: pmmFind: found allocated memory at 0
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: 1010
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 my_wrl: write to segment 0000h: addr: ff9a <-- 40000100
0:0 my_wrw: write to segment 0000h: addr: ff98 <-- 2
0:0 my_wrl: write to segment 0000h: addr: ff94 <-- 0
0:0 my_rdl: read from segment 0000h: addr: ff94 --> 0
0:0 my_rdw: read from segment 0000h: addr: ff98 --> 2
0:0 my_rdl: read from segment 0000h: addr: ff9a --> 40000100
0:0 pmm_handleInt: pmmDeallocate: PMM segment offset: 100
0:0 0: deadbeef
0:0 pmm_handleInt: pmmDeallocate: found allocated memory at index: 0
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: 0
offset: 0
length: 0
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: freed memory rval: 0000:0000 (expected: 0000:0000)
0:0 my_wrw: write to segment 0000h: addr: ff92 <-- 1
0:0 my_wrl: write to segment 0000h: addr: ff8e <-- deadbeef
0:0 my_wrl: write to segment 0000h: addr: ff8a <-- 0
0:0 my_wrw: write to segment 0000h: addr: ff88 <-- 0
0:0 my_wrl: write to segment 0000h: addr: ff84 <-- 0
0:0 my_rdl: read from segment 0000h: addr: ff84 --> 0
0:0 my_rdw: read from segment 0000h: addr: ff88 --> 0
0:0 my_rdl: read from segment 0000h: addr: ff8a --> 0
0:0 my_rdl: read from segment 0000h: addr: ff8e --> deadbeef
0:0 my_rdw: read from segment 0000h: addr: ff92 --> 1
0:0 pmm_handleInt: pmmAllocate: Length: 0, Handle: deadbeef, Flags: 1
0:0 pmm_handleInt: next_offset: 0x100
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: 0
offset: 0
length: 0
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: largest possible length: 00000fef
0:0 my_wrw: write to segment 0000h: addr: ff82 <-- 1
0:0 my_wrl: write to segment 0000h: addr: ff7e <-- deadbeef
0:0 my_wrl: write to segment 0000h: addr: ff7a <-- fef
0:0 my_wrw: write to segment 0000h: addr: ff78 <-- 0
0:0 my_wrl: write to segment 0000h: addr: ff74 <-- 0
0:0 my_rdl: read from segment 0000h: addr: ff74 --> 0
0:0 my_rdw: read from segment 0000h: addr: ff78 --> 0
0:0 my_rdl: read from segment 0000h: addr: ff7a --> fef
0:0 my_rdl: read from segment 0000h: addr: ff7e --> deadbeef
0:0 my_rdw: read from segment 0000h: addr: ff82 --> 1
0:0 pmm_handleInt: pmmAllocate: Length: fef0, Handle: deadbeef, Flags: 1
0:0 pmm_handleInt: next_offset: 0x100
0:0 pmm_handleInt: align: 0x10
0:0 pmm_handleInt: pmmAllocate: allocated memory at 40000100
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: fef0
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: allocated memory at: 4000:0100
0:0 my_wrw: write to segment 0000h: addr: ff72 <-- 1
0:0 my_wrl: write to segment 0000h: addr: ff6e <-- f00d4b0b
0:0 my_wrl: write to segment 0000h: addr: ff6a <-- 1
0:0 my_wrw: write to segment 0000h: addr: ff68 <-- 0
0:0 my_wrl: write to segment 0000h: addr: ff64 <-- 0
0:0 my_rdl: read from segment 0000h: addr: ff64 --> 0
0:0 my_rdw: read from segment 0000h: addr: ff68 --> 0
0:0 my_rdl: read from segment 0000h: addr: ff6a --> 1
0:0 my_rdl: read from segment 0000h: addr: ff6e --> f00d4b0b
0:0 my_rdw: read from segment 0000h: addr: ff72 --> 1
0:0 pmm_handleInt: pmmAllocate: Length: 10, Handle: f00d4b0b, Flags: 1
0:0 pmm_handleInt: next_offset: 0xfff0
0:0 pmm_handleInt: align: 0x10
pmm_handleInt: pmmAllocate: Not enough memory available for allocation!
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: fef0
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: allocated memory at: 0000:0000 expected: 0000:0000
0:0 my_wrl: write to segment 0000h: addr: ff60 <-- deadbeef
0:0 my_wrw: write to segment 0000h: addr: ff5e <-- 1
0:0 my_wrl: write to segment 0000h: addr: ff5a <-- 0
0:0 my_rdl: read from segment 0000h: addr: ff5a --> 0
0:0 my_rdw: read from segment 0000h: addr: ff5e --> 1
0:0 my_rdl: read from segment 0000h: addr: ff60 --> deadbeef
0:0 pmm_handleInt: pmmFind: Handle: deadbeef
0:0 pmm_handleInt: pmmFind: found allocated memory at 0
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: deadbeef
offset: 100
length: fef0
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 my_wrl: write to segment 0000h: addr: ff56 <-- 40000100
0:0 my_wrw: write to segment 0000h: addr: ff54 <-- 2
0:0 my_wrl: write to segment 0000h: addr: ff50 <-- 0
0:0 my_rdl: read from segment 0000h: addr: ff50 --> 0
0:0 my_rdw: read from segment 0000h: addr: ff54 --> 2
0:0 my_rdl: read from segment 0000h: addr: ff56 --> 40000100
0:0 pmm_handleInt: pmmDeallocate: PMM segment offset: 100
0:0 0: deadbeef
0:0 pmm_handleInt: pmmDeallocate: found allocated memory at index: 0
0:0 pmm_handleInt: dump of pmm_allocation_array:
0:0 0:
handle: 0
offset: 0
length: 0
0:0 1:
handle: 0
offset: 0
length: 0
0:0 2:
handle: 0
offset: 0
length: 0
0:0 3:
handle: 0
offset: 0
length: 0
0:0 4:
handle: 0
offset: 0
length: 0
0:0 5:
handle: 0
offset: 0
length: 0
0:0 6:
handle: 0
offset: 0
length: 0
0:0 7:
handle: 0
offset: 0
length: 0
0:0 8:
handle: 0
offset: 0
length: 0
0:0 9:
handle: 0
offset: 0
length: 0
0:0 pmm_test: freed memory rval: 0000:0000 (expected: 0000:0000)
0:0 PMM Structure:
dump(010f0000, 13):
010f0000: 24 50 4d 4d 01 10 e1 10 $PMM....
010f0008: 00 00 f0 00 00 00 00 00 ........
010f0010: cd fc cb ...
Executing Initialization Vector...
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0000
DS=2000 ES=0000 SS=1000 CS=c000 IP=0004 NV UP DI PL NZ NA PO NC
c000:0003 2e CS:
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0000
DS=2000 ES=0000 SS=1000 CS=c000 IP=0008 NV UP DI PL NZ NA PO NC
c000:0004: JMP WORD c000:004c
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0000
DS=2000 ES=0000 SS=1000 CS=c000 IP=0008 NV UP DI PL NZ NA PO NC
c000:0004 ff264a00 JMP [004a]
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0000
DS=2000 ES=0000 SS=1000 CS=c000 IP=004d NV UP DI PL NZ NA PO NC
c000:004c 90 NOP
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0000
DS=2000 ES=0000 SS=1000 CS=c000 IP=004e NV UP DI PL NZ NA PO NC
c000:004d 90 NOP
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0000
DS=2000 ES=0000 SS=1000 CS=c000 IP=0051 NV UP DI PL NZ NA PO NC
c000:004e: JMP NEAR c000:0061
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0000
DS=2000 ES=0000 SS=1000 CS=c000 IP=0051 NV UP DI PL NZ NA PO NC
c000:004e e91000 JMP 0061
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0000
DS=2000 ES=0000 SS=1000 CS=c000 IP=0062 NV UP DI PL NZ NA PO NC
c000:0061 fa CLI
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0000
DS=2000 ES=0000 SS=1000 CS=c000 IP=0065 NV UP DI PL NZ NA PO NC
c000:0062 bf5100 MOV DI,51
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0051
DS=2000 ES=0000 SS=1000 CS=c000 IP=0066 NV UP DI PL NZ NA PO NC
c000:0065 2e CS:
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0051
DS=2000 ES=0000 SS=1000 CS=c000 IP=0068 NV UP DI PL NZ NA PO NC
c000:0066 8c15 MOV [DI],SS
c000:68 my_wrw: write to CS segment c000h: addr: c0051 <-- 1000
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0051
DS=2000 ES=0000 SS=1000 CS=c000 IP=006b NV UP DI PL NZ NA PO NC
c000:0068 bf5300 MOV DI,53
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0053
DS=2000 ES=0000 SS=1000 CS=c000 IP=006c NV UP DI PL NZ NA PO NC
c000:006b 2e CS:
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0053
DS=2000 ES=0000 SS=1000 CS=c000 IP=006e NV UP DI PL NZ NA PO NC
c000:006c 8925 MOV [DI],SP
c000:6e my_wrw: write to CS segment c000h: addr: c0053 <-- fff8
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0053
DS=2000 ES=0000 SS=1000 CS=c000 IP=0071 NV UP DI PL NZ NA PO NC
c000:006e bf5500 MOV DI,55
AX=0010 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0055
DS=2000 ES=0000 SS=1000 CS=c000 IP=0073 NV UP DI PL NZ NA PO NC
c000:0071 8cd8 MOV AX,DS
AX=2000 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0055
DS=2000 ES=0000 SS=1000 CS=c000 IP=0074 NV UP DI PL NZ NA PO NC
c000:0073 2e CS:
AX=2000 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0055
DS=2000 ES=0000 SS=1000 CS=c000 IP=0076 NV UP DI PL NZ NA PO NC
c000:0074 8905 MOV [DI],AX
c000:76 my_wrw: write to CS segment c000h: addr: c0055 <-- 2000
AX=2000 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0055
DS=2000 ES=0000 SS=1000 CS=c000 IP=0079 NV UP DI PL NZ NA PO NC
c000:0076 bf5700 MOV DI,57
AX=2000 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0057
DS=2000 ES=0000 SS=1000 CS=c000 IP=007b NV UP DI PL NZ NA PO NC
c000:0079 8cc0 MOV AX,ES
AX=0000 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0057
DS=2000 ES=0000 SS=1000 CS=c000 IP=007c NV UP DI PL NZ NA PO NC
c000:007b 2e CS:
AX=0000 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0057
DS=2000 ES=0000 SS=1000 CS=c000 IP=007e NV UP DI PL NZ NA PO NC
c000:007c 8905 MOV [DI],AX
c000:7e my_wrw: write to CS segment c000h: addr: c0057 <-- 0
AX=0000 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0057
DS=2000 ES=0000 SS=1000 CS=c000 IP=007f NV UP DI PL NZ NA PO NC
c000:007e fb STI
AX=0000 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0057
DS=2000 ES=0000 SS=1000 CS=c000 IP=0080 NV UP EI PL NZ NA PO NC
c000:007f 0e PUSH CS
AX=0000 BX=0000 CX=0000 DX=0080 SP=fff6 BP=0000 SI=0000 DI=0057
DS=2000 ES=0000 SS=1000 CS=c000 IP=0081 NV UP EI PL NZ NA PO NC
c000:0080 1f POP DS
AX=0000 BX=0000 CX=0000 DX=0080 SP=fff8 BP=0000 SI=0000 DI=0057
DS=c000 ES=0000 SS=1000 CS=c000 IP=0082 NV UP EI PL NZ NA PO NC
c000:0081 66 DATA:
EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000080
ESP=0000fff8 EBP=00000000 ESI=00000000 EDI=00000057
DS=c000 ES=0000 SS=1000 CS=c000 EIP=00000083
NV UP EI PL NZ NA PO NC
c000:0082 52 PUSH EDX
AX=0000 BX=0000 CX=0000 DX=0080 SP=fff4 BP=0000 SI=0000 DI=0057
DS=c000 ES=0000 SS=1000 CS=c000 IP=0084 NV UP EI PL NZ NA PO NC
c000:0083 66 DATA:
EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000080
ESP=0000fff4 EBP=00000000 ESI=00000000 EDI=00000057
DS=c000 ES=0000 SS=1000 CS=c000 EIP=00000085
NV UP EI PL NZ NA PO NC
c000:0084 50 PUSH EAX
AX=0000 BX=0000 CX=0000 DX=0080 SP=fff0 BP=0000 SI=0000 DI=0057
DS=c000 ES=0000 SS=1000 CS=c000 IP=0086 NV UP EI PL NZ NA PO NC
c000:0085 66 DATA:
EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000080
ESP=0000fff0 EBP=00000000 ESI=00000000 EDI=00000057
DS=c000 ES=0000 SS=1000 CS=c000 EIP=00000087
NV UP EI PL NZ NA PO NC
c000:0086 51 PUSH ECX
AX=0000 BX=0000 CX=0000 DX=0080 SP=ffec BP=0000 SI=0000 DI=0057
DS=c000 ES=0000 SS=1000 CS=c000 IP=0089 NV UP EI PL NZ NA PO NC
c000:0087 0f01 ILLEGAL EXTENDED X86 OPCODE
c000:0087: 01 ILLEGAL EXTENDED X86 OPCODE!
halt_sys: file /prdmd/coreboot-v2/src/devices/../../util/x86emu/x86emu/ops2.c,
line 60
halted
AX=0000 BX=0000 CX=0000 DX=0080 SP=ffec BP=0000 SI=0000 DI=0057
DS=c000 ES=0000 SS=1000 CS=c000 IP=0089 NV UP EI PL NZ NA PO NC
c000:0089 e0 ILLEGAL EXTENDED X86 OPCODE
done
c000:89 Option ROM Exit Status: 0000
Exit Status Decode:
Stack unclean, initialization probably NOT COMPLETE!!
SS:SP = 1000:ffee, expected: 1000:fffe
PCI: 00:1a.0 init
USB Client: Setting up controller.. done.
PCI: 00:1c.0 init
Initializing SCH PCIe bridge.
PCI: 00:1c.1 init
Initializing SCH PCIe bridge.
PCI: 00:1d.0 init
UHCI: Setting up controller.. done.
PCI: 00:1d.1 init
UHCI: Setting up controller.. done.
PCI: 00:1d.2 init
UHCI: Setting up controller.. done.
PCI: 00:1d.7 init
EHCI: Setting up controller.. done.
PCI: 00:1e.0 init
MMC: Setting up controller.. done.
PCI: 00:1e.1 init
MMC: Setting up controller.. done.
PCI: 00:1e.2 init
MMC: Setting up controller.. done.
PCI: 00:1f.0 init
SCH: lpc_init
PCI: 00:1f.1 init
sch_ide: initializing... IDE0
Devices initialized
Show all devs...After init.
Root Device: enabled 1, 0 resources
APIC_CLUSTER: 0: enabled 1, 0 resources
APIC: 00: enabled 1, 0 resources
PCI_DOMAIN: 0000: enabled 1, 4 resources
PCI: 00:00.0: enabled 1, 0 resources
PCI: 00:02.0: enabled 1, 5 resources
PCI: 00:1a.0: enabled 1, 1 resources
PCI: 00:1b.0: enabled 0, 0 resources
PCI: 00:1c.0: enabled 1, 3 resources
PCI: 00:1c.1: enabled 1, 3 resources
PCI: 00:1d.0: enabled 1, 1 resources
PCI: 00:1d.1: enabled 1, 1 resources
PCI: 00:1d.2: enabled 1, 1 resources
PCI: 00:1d.7: enabled 1, 1 resources
PCI: 00:1e.0: enabled 1, 1 resources
PCI: 00:1e.1: enabled 1, 1 resources
PCI: 00:1e.2: enabled 1, 1 resources
PCI: 00:1f.0: enabled 1, 2 resources
PCI: 00:1f.1: enabled 1, 1 resources
High Tables Base is 3f3f0000.
Copying Interrupt Routing Table to 0x000f0000... done.
Verifing copy of Interrupt Routing Table at 0x000f0000... done
Checking Interrupt Routing Table consistency...
Inconsistent Interrupt Routing Table size (0x140/0xc0).
check_pirq_routing_table(): Interrupt Routing Table located at 000f0000.
Interrupt Routing Table checksum is: 0xdf but should be: 0xc3.
done.
Copying Interrupt Routing Table to 0x3f3f0000... done.
Verifing copy of Interrupt Routing Table at 0x3f3f0000... done
Checking Interrupt Routing Table consistency...
Inconsistent Interrupt Routing Table size (0x140/0xc0).
check_pirq_routing_table(): Interrupt Routing Table located at 3f3f0000.
Interrupt Routing Table checksum is: 0xdf but should be: 0x8a.
done.
Moving GDT to 0x3f3f0400...ok
Multiboot Information structure has been written.
Writing high table forward entry at 0x00000500
Wrote coreboot table at: 00000500 - 00000518 checksum b89f
New low_table_end: 0x00000518
Now going to write high coreboot table at 0x3f3f0800
rom_table_end = 0x3f3f0800
Adjust low_table_end from 0x00000518 to 0x00001000
Adjust rom_table_end from 0x3f3f0800 to 0x3f400000
Adding high table area
Adding UMA memory area
Adding PCIe config bar
Adding UMA memory area
Wrote coreboot table at: 3f3f0800 - 3f3f0a20 checksum 4559
Check CBFS header at fffeffd0
magic is 4f524243
Found CBFS header at fffeffd0
Check pci8086,8108.rom
CBFS: follow chain: fff00000 + 38 + 10000 + align -> fff10040
Check fallback/payload
Got a payload
Loading segment from rom address 0xfff10078
data (compression=0)
malloc Enter, size 36, free_mem_ptr 00158000
malloc 00158000
New segment dstaddr 0xef000 memsize 0x11000 srcaddr 0xfff100b0 filesize
0x11000
(cleaned up) New segment addr 0xef000 size 0x11000 offset 0xfff100b0 filesize
0x11000
Loading segment from rom address 0xfff10094
Entry Point 0x000ff80c
Loading Segment: addr: 0x00000000000ef000 memsz: 0x0000000000011000 filesz:
0x0000000000011000
lb: [0x0000000000100000, 0x0000000000160000)
Post relocation: addr: 0x00000000000ef000 memsz: 0x0000000000011000 filesz:
0x0000000000011000
it's not compressed!
[ 0x00000000000ef000, 0000000000100000, 0x0000000000100000) <- 00000000fff100b0
Loaded segments
Jumping to boot code at ff80c
entry = 0x000ff80c
lb_start = 0x00100000
lb_size = 0x00060000
adjust = 0x3f230000
buffer = 0x3f330000
elf_boot_notes = 0x00139aa8
adjusted_boot_notes = 0x3f369aa8
Start bios (version pre-0.4.3-20091030_222029-Mansoor)
init ivt
init bda
init pic
init timer
tsc calibrate start=1115634250 end=1117518891 diff=1884641
CPU Mhz=1098
math cp init
Find memory size
Attempting to find coreboot table
Found coreboot table forwarder.
Now attempting to find coreboot memory map
Add to e820 map: 00000000 00001000 2
Add to e820 map: 00001000 0009f000 1
Add to e820 map: 000c0000 3f330000 1
Add to e820 map: 3f3f0000 00010000 2
Add to e820 map: 3f400000 00400000 2
Add to e820 map: 3faf0000 00010000 2
Add to e820 map: e0000000 10000000 2
Add to e820 map: 00000000 00004000 1
Found mainboard iWrainbow G6
Found CBFS header at 0xfffeffd0
Add to e820 map: 000a0000 00050000 -1
Add to e820 map: 0009f400 00000c00 2
Add to e820 map: 000f0000 00010000 2
Ram Size=0x3f3f0000
Found 1 cpu(s) max supported 1 cpu(s)
malloc setup
Add to e820 map: 3f3e0000 00010000 2
init PMM
init PNPBIOS table
Scan for VGA option rom
Attempting to init PCI bdf 00:02.0 (dev/ven 81088086)
Searching CBFS for prefix pci8086,8108.rom
Found CBFS file pci8086,8108.rom
Copying data 65...@0xfff00038 to 194...@0x000c0000
Checking rom 0x000c0000 (sig aa55 size 128)
Running option rom at c000:0003
fail handle_155fXX:23(86):
a=3fbb5f40 b=00000000 c=00007862 d=0000c000 ds=a000 es=0000 ss=a000
si=00000006 di=0000369e bp=00007854 sp=0000784e cs=c000 ip=1d1b f=0246
fail handle_155fXX:23(86):
a=3fbb5f36 b=000008c1 c=00007862 d=0000003b ds=a000 es=0000 ss=a000
si=00000006 di=00007850 bp=00007854 sp=0000784e cs=c000 ip=1dd2 f=0202
fail handle_155fXX:23(86):
a=00005f35 b=000003b0 c=00000000 d=0000f074 ds=a000 es=0000 ss=a000
si=000008c1 di=0000783e bp=00007840 sp=0000783e cs=c000 ip=1ad6 f=0202
fail handle_155fXX:23(86):
a=00005f38 b=000808c1 c=00080003 d=0000c000 ds=a000 es=c000 ss=a000
si=00000000 di=00000003 bp=00007812 sp=00007804 cs=c000 ip=3115 f=0202
fail handle_155fXX:23(86):
a=22045f33 b=00005003 c=000000a2 d=00000e06 ds=a000 es=0000 ss=a000
si=00000000 di=00000000 bp=000077fa sp=000077de cs=c000 ip=353b f=0246
fail handle_155fXX:23(86):
a=00005f38 b=000008c1 c=00000003 d=0000c000 ds=a000 es=c000 ss=a000
si=00000000 di=00000003 bp=00007846 sp=00007838 cs=c000 ip=3115 f=0202
fail handle_155fXX:23(86):
a=22045f33 b=00005003 c=00000000 d=00000e06 ds=a000 es=0000 ss=a000
si=00000000 di=00000000 bp=0000782e sp=00007812 cs=c000 ip=353b f=0246
fail handle_155fXX:23(86):
a=00005f31 b=000008c1 c=00000008 d=000003c4 ds=a000 es=0000 ss=a000
si=00000006 di=00007850 bp=00007854 sp=0000784e cs=c000 ip=1e7a f=0202
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot