Maciej Pijanka wrote: > I have biostar M6TLD, it survives already raminit, patch is in > attachment, also log from boot and config.
Nice work so far! > Payload is uncompressed since i had problems with error in > decompression from lzma, What errors did you get? > and current payload is coreinfo. > > Machine reboots at point indicated in log but only difference > between next loops is like that one below, diff between two > restarts from same log. > > Jumping to image. > coreboot-2.3 Thu Dec 3 00:30:36 CET 2009 booting... > Calibrating delay loop... > -end 1ee10434f, start 1c570413d > +end 2c5cfc8a0, start 29d2fc6b1 > 32-bit delta 650 > calibrate_tsc 32-bit result is 650 > clocks_per_usec: 650 This difference makes sense if it is using something like RDTSC to calibrate. It runs from power on, so will be higher after a reset. > Anyone has idea how to debug why it restarts? I think the problem may be that RAM is not completely functional. Decompression needs RAM, and the payload also needs RAM. Did you try calling the very simple ram_check() function to test your RAM configuration? And how does the RAM configuration done by coreboot compare with that done by the factory BIOS? //Peter -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
