> Ok, so here is what the Thomson IP1000 looks like (see notations): > > -CONFIG_DCACHE_RAM_BASE = 0xc0000 - I have no idea what this is for??? > -CONFIG_DCACHE_RAM_SIZE = 0x1000 - I have no idea what this is for??? If your board doesn't use CAR it doesn't matter. It's the address and size for Cache-As-RAM.
> +CONFIG_HAVE_HARD_RESET = 0x0 > +CONFIG_HAVE_HIGH_TABLES = 0x1 > +CONFIG_HAVE_PIRQ_TABLE = 0x1 > -CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x1 - Why would newconfig > enable this for an Intel P3 processor? Is it enabled by default? Yes. > +CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT = 0x0 > +CONFIG_I830_VIDEO_MB_1MB = 0x0 > +CONFIG_I830_VIDEO_MB_512KB = 0x0 > +CONFIG_I830_VIDEO_MB_8MB = 0x1 > +CONFIG_I830_VIDEO_MB_OFF = 0x0 > -CONFIG_LOGICAL_CPUS = 0x0 - Why would newconfig specify 0 cpus??? LOGICAL_CPUS is code for multiple cores. In this case I'm assuming that your CPU is single-core. > +CONFIG_LOGICAL_CPUS = 0x1 > -CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x0 - I want this to be enabled > by default (0x1), so should I just change it in Options.lb? newconfig is going away. I wouldn't bother. > +CONFIG_PCI_OPTION_ROM_RUN_REALMODE = 0x1 > +CONFIG_PCI_OPTION_ROM_RUN_X86EMU = 0x0 > +CONFIG_PCI_OPTION_ROM_RUN_YABEL = 0x0 > -CONFIG_PCI_ROM_RUN = 0x0 - I want this to be enabled by default (0x1), > so should I just change it in Options.lb? Same thing. > +CONFIG_PCI_ROM_RUN = 0x1 > -CONFIG_RAMBASE = 0x4000 - What is the correct value? > +CONFIG_RAMBASE = 0x100000 - It seems to work fine ether way? If it works either way, then leave it at 0x100000. It's "safer" for things like SMI to have Coreboot run above 1MB. > -CONFIG_VGA_ROM_RUN = 0x0 - I want this to be enabled by default (0x1), > so should I just change it in Options.lb? Same thing. > +CONFIG_VGA_ROM_RUN = 0x1 Does it boot with Kconfig? If yes, you're done. Thanks, Myles -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
