Hi Radim, On Thu, Feb 25, 2010 at 3:00 AM, Radim <[email protected]> wrote: > Hello, > I'm interested in coreboot for year or two, but now I found older board which > has all supported chips on. Some time ago, I found in documentation how to > make add new target (mainboard), but now I can't find it anymore. Can you > please point me to some documentations dealing with this process (creating > Kconfig, devicetree.cb, ...)? > > My board is: > > QDI P6I440BX/B1 Brilliant - I > > lspci output: > > 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host > bridge (rev 02) > 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge > (rev 02) > 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) > 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) > 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) > 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) > > Very similar board is ASUS P2B, same chips but different vendor (bud PCB > layout is very similar). > > Flashrom is working, PLCC32 socket soldered on board, additional EEPROM > prepared, so where can I start? >
A lot of stuff has moved around recently as coreboot has gone to v4 and we are behind in our documentation. Start with the most recent build how to, http://www.coreboot.org/Build_HOWTO, and http://www.coreboot.org/Coreboot_Options, and . Older porting guides will help you with the device setup. Ask questions in IRC #coreboot on freenode. It would be a big help if you were to document your experience porting this platform. Marc -- http://se-eng.com -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
