Hello,
this patch fixes the issue where the board wasn't able to start after
getting unplugged. I also added some GPIOs so now the power on led is
working.
Signed-off-by: Knut Kujat <[email protected]>
---
Index: src/mainboard/supermicro/h8qme_fam10/romstage.c
===================================================================
--- src/mainboard/supermicro/h8qme_fam10/romstage.c (revisión: 5202)
+++ src/mainboard/supermicro/h8qme_fam10/romstage.c (copia de trabajo)
@@ -97,7 +97,11 @@
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
- /* nothing to do */
+#define SMBUS_SWITCH1 0x70
+#define SMBUS_SWITCH2 0x72
+// unsigned device=(ctrl->spd_addr[0])>>8;
+ smbus_send_byte(SMBUS_SWITCH1, 5 & 0x0f);
+ smbus_send_byte(SMBUS_SWITCH2, (5 >> 4) & 0x0f);
}
static inline int spd_read_byte(unsigned device, unsigned address)
@@ -239,6 +243,47 @@
#include "cpu/amd/microcode/microcode.c"
#include "cpu/amd/model_10xxx/update_microcode.c"
+#define GPIO1_DEV PNP_DEV(0x2e, W83627HF_GAME_MIDI_GPIO1)
+#define GPIO2_DEV PNP_DEV(0x2e, W83627HF_GPIO2)
+#define GPIO3_DEV PNP_DEV(0x2e, W83627HF_GPIO3)
+void write_GPIO(void)
+{
+ pnp_enter_ext_func_mode(GPIO1_DEV);
+ pnp_set_logical_device(GPIO1_DEV);
+ pnp_write_config(GPIO1_DEV, 0x30, 0x01);
+ pnp_write_config(GPIO1_DEV, 0x60, 0x00);
+ pnp_write_config(GPIO1_DEV, 0x61, 0x00);
+ pnp_write_config(GPIO1_DEV, 0x62, 0x00);
+ pnp_write_config(GPIO1_DEV, 0x63, 0x00);
+ pnp_write_config(GPIO1_DEV, 0x70, 0x00);
+ pnp_write_config(GPIO1_DEV, 0xf0, 0xff);
+ pnp_write_config(GPIO1_DEV, 0xf1, 0xff);
+ pnp_write_config(GPIO1_DEV, 0xf2, 0x00);
+ pnp_exit_ext_func_mode(GPIO1_DEV);
+
+ pnp_enter_ext_func_mode(GPIO2_DEV);
+ pnp_set_logical_device(GPIO2_DEV);
+ pnp_write_config(GPIO2_DEV, 0x30, 0x01);
+ pnp_write_config(GPIO2_DEV, 0xf0, 0xef);
+ pnp_write_config(GPIO2_DEV, 0xf1, 0xff);
+ pnp_write_config(GPIO2_DEV, 0xf2, 0x00);
+ pnp_write_config(GPIO2_DEV, 0xf3, 0x00);
+ pnp_write_config(GPIO2_DEV, 0xf5, 0x48);
+ pnp_write_config(GPIO2_DEV, 0xf6, 0x00);
+ pnp_write_config(GPIO2_DEV, 0xf7, 0xc0);
+ pnp_exit_ext_func_mode(GPIO2_DEV);
+
+ pnp_enter_ext_func_mode(GPIO3_DEV);
+ pnp_set_logical_device(GPIO3_DEV);
+ pnp_write_config(GPIO3_DEV, 0x30, 0x00);
+ pnp_write_config(GPIO3_DEV, 0xf0, 0xff);
+ pnp_write_config(GPIO3_DEV, 0xf1, 0xff);
+ pnp_write_config(GPIO3_DEV, 0xf2, 0xff);
+ pnp_write_config(GPIO3_DEV, 0xf3, 0x40);
+ pnp_exit_ext_func_mode(GPIO3_DEV);
+}
+
+
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@@ -261,8 +306,9 @@
w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
pnp_exit_ext_func_mode(SERIAL_DEV);
- uart_init();
- console_init();
+ uart_init();
+ console_init();
+ write_GPIO();
printk_debug("\n");
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
