Author: myles Date: Fri Mar 26 19:31:12 2010 New Revision: 5303 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5303
Log: Remove dead code and make white space more consistent for acpi_tables.c Signed-off-by: Myles Watson <[email protected]> Acked-by: Myles Watson <[email protected]> Modified: trunk/src/mainboard/amd/dbm690t/acpi_tables.c trunk/src/mainboard/amd/mahogany/acpi_tables.c trunk/src/mainboard/amd/mahogany_fam10/acpi_tables.c trunk/src/mainboard/amd/pistachio/acpi_tables.c trunk/src/mainboard/amd/serengeti_cheetah/acpi_tables.c trunk/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c trunk/src/mainboard/kontron/kt690/acpi_tables.c trunk/src/mainboard/msi/ms9652_fam10/Kconfig trunk/src/mainboard/technexion/tim5690/acpi_tables.c trunk/src/mainboard/technexion/tim8690/acpi_tables.c Modified: trunk/src/mainboard/amd/dbm690t/acpi_tables.c ============================================================================== --- trunk/src/mainboard/amd/dbm690t/acpi_tables.c Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/amd/dbm690t/acpi_tables.c Fri Mar 26 19:31:12 2010 (r5303) @@ -59,13 +59,6 @@ extern const acpi_header_t AmlCode; -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const acpi_header_t AmlCode_ssdt2; -extern const acpi_header_t AmlCode_ssdt3; -extern const acpi_header_t AmlCode_ssdt4; -extern const acpi_header_t AmlCode_ssdt5; -#endif - #define IO_APIC_ADDR 0xfec00000UL unsigned long acpi_fill_mcfg(unsigned long current) @@ -177,22 +170,6 @@ current += madt->header.length; acpi_add_table(rsdp, madt); -#if 0 - /* SRAT */ - printk(BIOS_DEBUG, "ACPI: * SRAT\n"); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - printk(BIOS_DEBUG, "ACPI: * SLIT\n"); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); -#endif - /* SSDT */ printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; @@ -201,46 +178,6 @@ current += ssdt->length; acpi_add_table(rsdp, ssdt); -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */ - - for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */ - if ((sysconf.pci1234[i] & 1) != 1) - continue; - uint8_t c; - if (i < 7) { - c = (uint8_t) ('4' + i - 1); - } else { - c = (uint8_t) ('A' + i - 1 - 6); - } - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ - current = (current + 0x07) & -0x08; - ssdtx = (acpi_header_t *) current; - switch (sysconf.hcid[i]) { - case 1: /* 8132 */ - p = &AmlCode_ssdt2; - break; - case 2: /* 8151 */ - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - current += p->length; - memcpy((void *)ssdtx, p, p->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - /* FACS */ printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; @@ -271,12 +208,6 @@ printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk(BIOS_DEBUG, "srat\n"); - dump_mem(srat, ((void *)srat) + srat->header.length); - - printk(BIOS_DEBUG, "slit\n"); - dump_mem(slit, ((void *)slit) + slit->header.length); - printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); Modified: trunk/src/mainboard/amd/mahogany/acpi_tables.c ============================================================================== --- trunk/src/mainboard/amd/mahogany/acpi_tables.c Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/amd/mahogany/acpi_tables.c Fri Mar 26 19:31:12 2010 (r5303) @@ -104,21 +104,21 @@ #if CONFIG_ACPI_SSDTX_NUM >= 1 static void update_ssdtx(void *ssdtx, int i) { - uint8_t *PCI; - uint8_t *HCIN; - uint8_t *UID; + u8 *PCI; + u8 *HCIN; + u8 *UID; PCI = ssdtx + 0x32; HCIN = ssdtx + 0x39; UID = ssdtx + 0x40; if (i < 7) { - *PCI = (uint8_t) ('4' + i - 1); + *PCI = (u8) ('4' + i - 1); } else { - *PCI = (uint8_t) ('A' + i - 1 - 6); + *PCI = (u8) ('A' + i - 1 - 6); } - *HCIN = (uint8_t) i; - *UID = (uint8_t) (i + 3); + *HCIN = (u8) i; + *UID = (u8) (i + 3); /* FIXME: need to update the GSI id in the ssdtx too */ @@ -148,9 +148,9 @@ int i; #endif - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - /* Align ACPI tables to 16byte */ + /* Align ACPI tables to 16 bytes */ start = (start + 0x0f) & -0x10; current = start; @@ -184,22 +184,6 @@ current += madt->header.length; acpi_add_table(rsdp, madt); -#if 0 - /* SRAT */ - printk(BIOS_DEBUG, "ACPI: * SRAT\n"); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - printk(BIOS_DEBUG, "ACPI: * SLIT\n"); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); -#endif - /* SSDT */ printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; @@ -215,11 +199,11 @@ for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */ if ((sysconf.pci1234[i] & 1) != 1) continue; - uint8_t c; + u8 c; if (i < 7) { - c = (uint8_t) ('4' + i - 1); + c = (u8) ('4' + i - 1); } else { - c = (uint8_t) ('A' + i - 1 - 6); + c = (u8) ('A' + i - 1 - 6); } printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ current = (current + 0x07) & -0x08; @@ -278,12 +262,6 @@ printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk(BIOS_DEBUG, "srat\n"); - dump_mem(srat, ((void *)srat) + srat->header.length); - - printk(BIOS_DEBUG, "slit\n"); - dump_mem(slit, ((void *)slit) + slit->header.length); - printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); Modified: trunk/src/mainboard/amd/mahogany_fam10/acpi_tables.c ============================================================================== --- trunk/src/mainboard/amd/mahogany_fam10/acpi_tables.c Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/amd/mahogany_fam10/acpi_tables.c Fri Mar 26 19:31:12 2010 (r5303) @@ -36,11 +36,11 @@ u32 i; print_debug("dump_mem:"); - for(i=start;i<end;i++) { - if((i & 0xf)==0) { + for (i = start; i < end; i++) { + if ((i & 0xf) == 0) { printk(BIOS_DEBUG, "\n%08x:", i); } - printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); + printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i)); } print_debug("\n"); } @@ -104,14 +104,13 @@ HCIN = ssdtx + 0x39; UID = ssdtx + 0x40; - if(i<7) { - *PCI = (u8) ('4' + i - 1); - } - else { - *PCI = (u8) ('A' + i - 1 - 6); + if (i < 7) { + *PCI = (u8) ('4' + i - 1); + } else { + *PCI = (u8) ('A' + i - 1 - 6); } *HCIN = (u8) i; - *UID = (u8) (i+3); + *UID = (u8) (i + 3); /* FIXME: need to update the GSI id in the ssdtx too */ @@ -137,10 +136,10 @@ int i; #endif - get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ /* Align ACPI tables to 16 bytes */ - start = ( start + 0x0f) & -0x10; + start = (start + 0x0f) & -0x10; current = start; printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); @@ -165,31 +164,31 @@ hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); - acpi_add_table(rsdp,hpet); + acpi_add_table(rsdp, hpet); /* If we want to use HPET Timers Linux wants an MADT */ current = ( current + 0x07) & -0x08; printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); madt = (acpi_madt_t *) current; acpi_create_madt(madt); - current+=madt->header.length; - acpi_add_table(rsdp,madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); /* SRAT */ current = ( current + 0x07) & -0x08; printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); srat = (acpi_srat_t *) current; acpi_create_srat(srat); - current+=srat->header.length; - acpi_add_table(rsdp,srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); /* SLIT */ current = ( current + 0x07) & -0x08; printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); slit = (acpi_slit_t *) current; acpi_create_slit(slit); - current+=slit->header.length; - acpi_add_table(rsdp,slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); /* SSDT */ current = ( current + 0x0f) & -0x10; @@ -209,41 +208,41 @@ #if CONFIG_ACPI_SSDTX_NUM >= 1 - /* same htio, but different possition? We may have to copy, + /* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */ for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink if((sysconf.pci1234[i] & 1) != 1 ) continue; u8 c; - if(i<7) { - c = (u8) ('4' + i - 1); - } - else { - c = (u8) ('A' + i - 1 - 6); + if (i < 7) { + c = (u8) ('4' + i - 1); + } else { + c = (u8) ('A' + i - 1 - 6); } current = ( current + 0x07) & -0x08; printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt ssdtx = (acpi_header_t *)current; - switch(sysconf.hcid[i]) { + switch (sysconf.hcid[i]) { case 1: p = &AmlCode_ssdt2; break; case 2: p = &AmlCode_ssdt3; break; - case 3: //8131 + case 3: /* 8131 */ p = &AmlCode_ssdt4; - break; - default: - //HTX no io apic + break; + default: + /* HTX no io apic */ p = &AmlCode_ssdt5; + break; } - current += ((acpi_header_t *)p)->length; + current += p->length; memcpy((void *)ssdtx, p, p->length); update_ssdtx((void *)ssdtx, i); ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((unsigned char *)ssdtx,ssdtx->length); - acpi_add_table(rsdp,ssdtx); + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); } #endif @@ -268,8 +267,8 @@ fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); - acpi_create_fadt(fadt,facs,dsdt); - acpi_add_table(rsdp,fadt); + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); #if DUMP_ACPI_TABLES == 1 printk(BIOS_DEBUG, "rsdp\n"); @@ -297,4 +296,3 @@ printk(BIOS_INFO, "ACPI: done.\n"); return current; } - Modified: trunk/src/mainboard/amd/pistachio/acpi_tables.c ============================================================================== --- trunk/src/mainboard/amd/pistachio/acpi_tables.c Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/amd/pistachio/acpi_tables.c Fri Mar 26 19:31:12 2010 (r5303) @@ -59,13 +59,6 @@ extern const acpi_header_t AmlCode; -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const acpi_header_t AmlCode_ssdt2; -extern const acpi_header_t AmlCode_ssdt3; -extern const acpi_header_t AmlCode_ssdt4; -extern const acpi_header_t AmlCode_ssdt5; -#endif - #define IO_APIC_ADDR 0xfec00000UL unsigned long acpi_fill_mcfg(unsigned long current) @@ -177,22 +170,6 @@ current += madt->header.length; acpi_add_table(rsdp, madt); -#if 0 - /* SRAT */ - printk(BIOS_DEBUG, "ACPI: * SRAT\n"); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - printk(BIOS_DEBUG, "ACPI: * SLIT\n"); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); -#endif - /* SSDT */ printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; @@ -201,47 +178,6 @@ current += ssdt->length; acpi_add_table(rsdp, ssdt); -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */ - - for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */ - if ((sysconf.pci1234[i] & 1) != 1) - continue; - uint8_t c; - if (i < 7) { - c = (uint8_t) ('4' + i - 1); - } else { - c = (uint8_t) ('A' + i - 1 - 6); - } - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ - current = (current + 0x07) & -0x08; - ssdtx = (acpi_header_t *) current; - switch (sysconf.hcid[i]) { - case 1: /* 8132 */ - p = &AmlCode_ssdt2; - break; - case 2: /* 8151 */ - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - current += ((acpi_header_t *) p)->length; - memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *) p)->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = - acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - /* FACS */ printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; @@ -273,12 +209,6 @@ printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk(BIOS_DEBUG, "srat\n"); - dump_mem(srat, ((void *)srat) + srat->header.length); - - printk(BIOS_DEBUG, "slit\n"); - dump_mem(slit, ((void *)slit) + slit->header.length); - printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); Modified: trunk/src/mainboard/amd/serengeti_cheetah/acpi_tables.c ============================================================================== --- trunk/src/mainboard/amd/serengeti_cheetah/acpi_tables.c Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/amd/serengeti_cheetah/acpi_tables.c Fri Mar 26 19:31:12 2010 (r5303) @@ -23,19 +23,19 @@ #define DUMP_ACPI_TABLES 0 #if DUMP_ACPI_TABLES == 1 -static void dump_mem(unsigned start, unsigned end) +static void dump_mem(u32 start, u32 end) { - - unsigned i; - print_debug("dump_mem:"); - for(i=start;i<end;i++) { - if((i & 0xf)==0) { - printk(BIOS_DEBUG, "\n%08x:", i); - } - printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); - } - print_debug("\n"); - } + + u32 i; + print_debug("dump_mem:"); + for(i=start;i<end;i++) { + if((i & 0xf)==0) { + printk(BIOS_DEBUG, "\n%08x:", i); + } + printk(BIOS_DEBUG, " %02x", (unsigned char)*((unsigned char *)i)); + } + print_debug("\n"); +} #endif extern const acpi_header_t AmlCode; @@ -55,102 +55,98 @@ unsigned long acpi_fill_madt(unsigned long current) { - unsigned int gsi_base=0x18; + u32 gsi_base=0x18; - struct mb_sysconf_t *m; + struct mb_sysconf_t *m; + + m = sysconf.mb; - m = sysconf.mb; - /* create all subtables for processors */ current = acpi_create_madt_lapics(current); - + /* Write 8111 IOAPIC */ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111, IO_APIC_ADDR, 0); - /* Write all 8131 IOAPICs */ - { - device_t dev; - struct resource *res; - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_1, - res->base, gsi_base ); + /* Write all 8131 IOAPICs */ + { + device_t dev; + struct resource *res; + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_1, + res->base, gsi_base ); gsi_base+=7; - } - } - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_2, - res->base, gsi_base ); - gsi_base+=7; - } - } - - int i; - int j = 0; - - for(i=1; i< sysconf.hc_possible_num; i++) { - unsigned d; - if(!(sysconf.pci1234[i] & 0x1) ) continue; - // 8131 need to use +4 - - switch (sysconf.hcid[i]) { - case 1: + } + } + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132_2, + res->base, gsi_base ); + gsi_base+=7; + } + } + + int i; + int j = 0; + + for(i=1; i< sysconf.hc_possible_num; i++) { + u32 d = 0; + if(!(sysconf.pci1234[i] & 0x1) ) continue; + // 8131 need to use +4 + switch (sysconf.hcid[i]) { + case 1: d = 7; break; case 3: d = 4; break; } - switch (sysconf.hcid[i]) { - case 1: + switch (sysconf.hcid[i]) { + case 1: case 3: - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][0], - res->base, gsi_base ); - gsi_base+=d; - } - } - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][1], - res->base, gsi_base ); - gsi_base+=d; - - } - } - break; - } - - j++; - } + dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][0], + res->base, gsi_base ); + gsi_base+=d; + } + } + dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][1], + res->base, gsi_base ); + gsi_base+=d; - } + } + } + break; + } + j++; + } + } current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) current, 0, 0, 2, 5 ); /* 0: mean bus 0--->ISA */ /* 0: PIC 0 */ - /* 2: APIC 2 */ + /* 2: APIC 2 */ /* 5 mean: 0101 --> Edige-triggered, Active high*/ - /* create all subtables for processors */ - current = acpi_create_madt_lapic_nmis(current, 5, 1); + /* create all subtables for processors */ + current = acpi_create_madt_lapic_nmis(current, 5, 1); /* 1: LINT1 connect to NMI */ - return current; } @@ -158,24 +154,24 @@ static void update_ssdtx(void *ssdtx, int i) { - uint8_t *PCI; - uint8_t *HCIN; - uint8_t *UID; - - PCI = ssdtx + 0x32; - HCIN = ssdtx + 0x39; - UID = ssdtx + 0x40; - - if(i<7) { - *PCI = (uint8_t) ('4' + i - 1); - } - else { - *PCI = (uint8_t) ('A' + i - 1 - 6); - } - *HCIN = (uint8_t) i; - *UID = (uint8_t) (i+3); + u8 *PCI; + u8 *HCIN; + u8 *UID; + + PCI = ssdtx + 0x32; + HCIN = ssdtx + 0x39; + UID = ssdtx + 0x40; + + if(i<7) { + *PCI = (u8) ('4' + i - 1); + } + else { + *PCI = (u8) ('A' + i - 1 - 6); + } + *HCIN = (u8) i; + *UID = (u8) (i+3); - /* FIXME: need to update the GSI id in the ssdtx too */ + /* FIXME: need to update the GSI id in the ssdtx too */ } @@ -204,10 +200,10 @@ get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn - /* Align ACPI tables to 16byte */ - start = ( start + 0x0f ) & -0x10; + /* Align ACPI tables to 16 bytes */ + start = ( start + 0x0f) & -0x10; current = start; - + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); /* We need at least an RSDP and an RSDT Table */ @@ -218,43 +214,42 @@ /* clear all table memory */ memset((void *)start, 0, current - start); - + acpi_write_rsdp(rsdp, rsdt, NULL); acpi_write_rsdt(rsdt); /* * We explicitly add these tables later on: */ - printk(BIOS_DEBUG, "ACPI: * HPET\n"); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); - acpi_add_table(rsdp,hpet); + acpi_add_table(rsdp, hpet); /* If we want to use HPET Timers Linux wants an MADT */ - printk(BIOS_DEBUG, "ACPI: * MADT\n"); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n", current); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current+=madt->header.length; - acpi_add_table(rsdp,madt); - + acpi_add_table(rsdp, madt); /* SRAT */ - printk(BIOS_DEBUG, "ACPI: * SRAT\n"); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current+=srat->header.length; - acpi_add_table(rsdp,srat); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current+=srat->header.length; + acpi_add_table(rsdp, srat); /* SLIT */ - printk(BIOS_DEBUG, "ACPI: * SLIT\n"); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current+=slit->header.length; - acpi_add_table(rsdp,slit); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current+=slit->header.length; + acpi_add_table(rsdp, slit); /* SSDT */ - printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); ssdt = (acpi_header_t *)current; acpi_create_ssdt_generator(ssdt, "DYNADATA"); @@ -263,40 +258,40 @@ #if CONFIG_ACPI_SSDTX_NUM >= 1 - //same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table + //same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - uint8_t c; - if(i<7) { - c = (uint8_t) ('4' + i - 1); - } - else { - c = (uint8_t) ('A' + i - 1 - 6); - } - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); //pci0 and pci1 are in dsdt - current = ( current + 0x07) & -0x08; - ssdtx = (acpi_header_t *)current; - switch(sysconf.hcid[i]) { - case 1: //8132 - p = &AmlCode_ssdt2; - break; - case 2: //8151 - p = &AmlCode_ssdt3; - break; + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + u8 c; + if(i<7) { + c = (u8) ('4' + i - 1); + } + else { + c = (u8) ('A' + i - 1 - 6); + } + current = ( current + 0x07) & -0x08; + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + switch(sysconf.hcid[i]) { + case 1: //8132 + p = &AmlCode_ssdt2; + break; + case 2: //8151 + p = &AmlCode_ssdt3; + break; case 3: //8131 - p = &AmlCode_ssdt4; - break; - default: - continue; - } - current += ((acpi_header_t *)p)->length; - memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *)p)->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((unsigned char *)ssdtx,ssdtx->length); - acpi_add_table(rsdp,ssdtx); - } + p = &AmlCode_ssdt4; + break; + default: + continue; + } + current += p->length; + memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *)p)->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); + } #endif /* FACS */ @@ -306,41 +301,41 @@ acpi_create_facs(facs); /* DSDT */ - printk(BIOS_DEBUG, "ACPI: * DSDT\n"); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); dsdt = (acpi_header_t *)current; current += AmlCode.length; memcpy((void *)dsdt, &AmlCode, AmlCode.length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); /* FDAT */ - printk(BIOS_DEBUG, "ACPI: * FADT\n"); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); - acpi_create_fadt(fadt,facs,dsdt); - acpi_add_table(rsdp,fadt); + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); #if DUMP_ACPI_TABLES == 1 printk(BIOS_DEBUG, "rsdp\n"); dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); - printk(BIOS_DEBUG, "rsdt\n"); - dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); + printk(BIOS_DEBUG, "rsdt\n"); + dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); - printk(BIOS_DEBUG, "madt\n"); - dump_mem(madt, ((void *)madt) + madt->header.length); + printk(BIOS_DEBUG, "madt\n"); + dump_mem(madt, ((void *)madt) + madt->header.length); - printk(BIOS_DEBUG, "srat\n"); - dump_mem(srat, ((void *)srat) + srat->header.length); + printk(BIOS_DEBUG, "srat\n"); + dump_mem(srat, ((void *)srat) + srat->header.length); - printk(BIOS_DEBUG, "slit\n"); - dump_mem(slit, ((void *)slit) + slit->header.length); + printk(BIOS_DEBUG, "slit\n"); + dump_mem(slit, ((void *)slit) + slit->header.length); - printk(BIOS_DEBUG, "ssdt\n"); - dump_mem(ssdt, ((void *)ssdt) + ssdt->length); + printk(BIOS_DEBUG, "ssdt\n"); + dump_mem(ssdt, ((void *)ssdt) + ssdt->length); - printk(BIOS_DEBUG, "fadt\n"); - dump_mem(fadt, ((void *)fadt) + fadt->header.length); + printk(BIOS_DEBUG, "fadt\n"); + dump_mem(fadt, ((void *)fadt) + fadt->header.length); #endif printk(BIOS_INFO, "ACPI: done.\n"); Modified: trunk/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c ============================================================================== --- trunk/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c Fri Mar 26 19:31:12 2010 (r5303) @@ -108,7 +108,6 @@ for(i=1; i< sysconf.hc_possible_num; i++) { u32 d = 0; - if(!(sysconf.pci1234[i] & 0x1) ) continue; // 8131 need to use +4 switch (sysconf.hcid[i]) { @@ -164,7 +163,6 @@ extern void get_bus_conf(void); extern void update_ssdt(void *ssdt); - static void update_ssdtx(void *ssdtx, int i) { u8 *PCI; @@ -209,7 +207,7 @@ get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn /* Align ACPI tables to 16 bytes */ - start = ( start + 0x0f) & -0x10; + start = ( start + 0x0f) & -0x10; current = start; printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); @@ -234,15 +232,15 @@ hpet = (acpi_hpet_t *) current; current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); - acpi_add_table(rsdp,hpet); + acpi_add_table(rsdp, hpet); /* If we want to use HPET Timers Linux wants an MADT */ current = ( current + 0x07) & -0x08; - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n", current); madt = (acpi_madt_t *) current; acpi_create_madt(madt); current+=madt->header.length; - acpi_add_table(rsdp,madt); + acpi_add_table(rsdp, madt); /* SRAT */ current = ( current + 0x07) & -0x08; @@ -250,7 +248,7 @@ srat = (acpi_srat_t *) current; acpi_create_srat(srat); current+=srat->header.length; - acpi_add_table(rsdp,srat); + acpi_add_table(rsdp, srat); /* SLIT */ current = ( current + 0x07) & -0x08; @@ -258,7 +256,7 @@ slit = (acpi_slit_t *) current; acpi_create_slit(slit); current+=slit->header.length; - acpi_add_table(rsdp,slit); + acpi_add_table(rsdp, slit); /* SSDT */ current = ( current + 0x0f) & -0x10; @@ -270,8 +268,8 @@ update_ssdt((void*)ssdt); /* recalculate checksum */ ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); + ssdt->checksum = acpi_checksum((unsigned char *)ssdt, ssdt->length); + acpi_add_table(rsdp, ssdt); printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); current = acpi_add_ssdt_pstates(rsdp, current); @@ -290,7 +288,7 @@ else { c = (u8) ('A' + i - 1 - 6); } - current = ( current + 0x07) & -0x08; + current = ( current + 0x07) & -0x08; printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt ssdtx = (acpi_header_t *)current; switch(sysconf.hcid[i]) { @@ -319,7 +317,7 @@ /* DSDT */ current = ( current + 0x07) & -0x08; printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt + dsdt = (acpi_header_t *)current; current += AmlCode.length; memcpy((void *)dsdt, &AmlCode, AmlCode.length); printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); @@ -327,7 +325,7 @@ /* FACS */ // it needs 64 bit alignment current = ( current + 0x07) & -0x08; printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt + facs = (acpi_facs_t *) current; current += sizeof(acpi_facs_t); acpi_create_facs(facs); @@ -337,8 +335,8 @@ fadt = (acpi_fadt_t *) current; current += sizeof(acpi_fadt_t); - acpi_create_fadt(fadt,facs,dsdt); - acpi_add_table(rsdp,fadt); + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); #if DUMP_ACPI_TABLES == 1 printk(BIOS_DEBUG, "rsdp\n"); Modified: trunk/src/mainboard/kontron/kt690/acpi_tables.c ============================================================================== --- trunk/src/mainboard/kontron/kt690/acpi_tables.c Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/kontron/kt690/acpi_tables.c Fri Mar 26 19:31:12 2010 (r5303) @@ -59,13 +59,6 @@ extern const acpi_header_t AmlCode; -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const acpi_header_t AmlCode_ssdt2; -extern const acpi_header_t AmlCode_ssdt3; -extern const acpi_header_t AmlCode_ssdt4; -extern const acpi_header_t AmlCode_ssdt5; -#endif - #define IO_APIC_ADDR 0xfec00000UL unsigned long acpi_fill_mcfg(unsigned long current) @@ -177,22 +170,6 @@ current += madt->header.length; acpi_add_table(rsdp, madt); -#if 0 - /* SRAT */ - printk(BIOS_DEBUG, "ACPI: * SRAT\n"); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - printk(BIOS_DEBUG, "ACPI: * SLIT\n"); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); -#endif - /* SSDT */ printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; @@ -201,47 +178,6 @@ current += ssdt->length; acpi_add_table(rsdp, ssdt); -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */ - - for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */ - if ((sysconf.pci1234[i] & 1) != 1) - continue; - uint8_t c; - if (i < 7) { - c = (uint8_t) ('4' + i - 1); - } else { - c = (uint8_t) ('A' + i - 1 - 6); - } - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ - current = (current + 0x07) & -0x08; - ssdtx = (acpi_header_t *) current; - switch (sysconf.hcid[i]) { - case 1: /* 8132 */ - p = &AmlCode_ssdt2; - break; - case 2: /* 8151 */ - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - current += ((acpi_header_t *) p)->length; - memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *) p)->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = - acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - /* FACS */ printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; @@ -272,12 +208,6 @@ printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk(BIOS_DEBUG, "srat\n"); - dump_mem(srat, ((void *)srat) + srat->header.length); - - printk(BIOS_DEBUG, "slit\n"); - dump_mem(slit, ((void *)slit) + slit->header.length); - printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); Modified: trunk/src/mainboard/msi/ms9652_fam10/Kconfig ============================================================================== --- trunk/src/mainboard/msi/ms9652_fam10/Kconfig Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/msi/ms9652_fam10/Kconfig Fri Mar 26 19:31:12 2010 (r5303) @@ -37,11 +37,6 @@ default 0x04000 depends on BOARD_MSI_MS9652_FAM10 -config CONFIG_ACPI_SSDTX_NUM - hex - default 0x1F - depends on BOARD_MSI_MS9652_FAM10 - config GENERATE_PIRQ_TABLE bool default y Modified: trunk/src/mainboard/technexion/tim5690/acpi_tables.c ============================================================================== --- trunk/src/mainboard/technexion/tim5690/acpi_tables.c Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/technexion/tim5690/acpi_tables.c Fri Mar 26 19:31:12 2010 (r5303) @@ -59,13 +59,6 @@ extern const acpi_header_t AmlCode; -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const acpi_header_t AmlCode_ssdt2; -extern const acpi_header_t AmlCode_ssdt3; -extern const acpi_header_t AmlCode_ssdt4; -extern const acpi_header_t AmlCode_ssdt5; -#endif - #define IO_APIC_ADDR 0xfec00000UL unsigned long acpi_fill_mcfg(unsigned long current) @@ -177,22 +170,6 @@ current += madt->header.length; acpi_add_table(rsdp, madt); -#if 0 - /* SRAT */ - printk(BIOS_DEBUG, "ACPI: * SRAT\n"); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - printk(BIOS_DEBUG, "ACPI: * SLIT\n"); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); -#endif - /* SSDT */ printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; @@ -201,47 +178,6 @@ current += ssdt->length; acpi_add_table(rsdp, ssdt); -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */ - - for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */ - if ((sysconf.pci1234[i] & 1) != 1) - continue; - uint8_t c; - if (i < 7) { - c = (uint8_t) ('4' + i - 1); - } else { - c = (uint8_t) ('A' + i - 1 - 6); - } - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ - current = (current + 0x07) & -0x08; - ssdtx = (acpi_header_t *) current; - switch (sysconf.hcid[i]) { - case 1: /* 8132 */ - p = &AmlCode_ssdt2; - break; - case 2: /* 8151 */ - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - current += ((acpi_header_t *) p)->length; - memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *) p)->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = - acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - /* FACS */ printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; @@ -272,12 +208,6 @@ printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk(BIOS_DEBUG, "srat\n"); - dump_mem(srat, ((void *)srat) + srat->header.length); - - printk(BIOS_DEBUG, "slit\n"); - dump_mem(slit, ((void *)slit) + slit->header.length); - printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); Modified: trunk/src/mainboard/technexion/tim8690/acpi_tables.c ============================================================================== --- trunk/src/mainboard/technexion/tim8690/acpi_tables.c Fri Mar 26 12:47:13 2010 (r5302) +++ trunk/src/mainboard/technexion/tim8690/acpi_tables.c Fri Mar 26 19:31:12 2010 (r5303) @@ -59,13 +59,6 @@ extern const acpi_header_t AmlCode; -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const acpi_header_t AmlCode_ssdt2; -extern const acpi_header_t AmlCode_ssdt3; -extern const acpi_header_t AmlCode_ssdt4; -extern const acpi_header_t AmlCode_ssdt5; -#endif - #define IO_APIC_ADDR 0xfec00000UL unsigned long acpi_fill_mcfg(unsigned long current) @@ -177,22 +170,6 @@ current += madt->header.length; acpi_add_table(rsdp, madt); -#if 0 - /* SRAT */ - printk(BIOS_DEBUG, "ACPI: * SRAT\n"); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - printk(BIOS_DEBUG, "ACPI: * SLIT\n"); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); -#endif - /* SSDT */ printk(BIOS_DEBUG, "ACPI: * SSDT\n"); ssdt = (acpi_header_t *)current; @@ -201,47 +178,6 @@ current += ssdt->length; acpi_add_table(rsdp, ssdt); -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */ - - for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */ - if ((sysconf.pci1234[i] & 1) != 1) - continue; - uint8_t c; - if (i < 7) { - c = (uint8_t) ('4' + i - 1); - } else { - c = (uint8_t) ('A' + i - 1 - 6); - } - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ - current = (current + 0x07) & -0x08; - ssdtx = (acpi_header_t *) current; - switch (sysconf.hcid[i]) { - case 1: /* 8132 */ - p = &AmlCode_ssdt2; - break; - case 2: /* 8151 */ - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - current += ((acpi_header_t *) p)->length; - memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *) p)->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = - acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - /* FACS */ printk(BIOS_DEBUG, "ACPI: * FACS\n"); facs = (acpi_facs_t *) current; @@ -272,12 +208,6 @@ printk(BIOS_DEBUG, "madt\n"); dump_mem(madt, ((void *)madt) + madt->header.length); - printk(BIOS_DEBUG, "srat\n"); - dump_mem(srat, ((void *)srat) + srat->header.length); - - printk(BIOS_DEBUG, "slit\n"); - dump_mem(slit, ((void *)slit) + slit->header.length); - printk(BIOS_DEBUG, "ssdt\n"); dump_mem(ssdt, ((void *)ssdt) + ssdt->length); -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
