On Fri, May 7, 2010 at 7:01 PM, Idwer Vollering <[email protected]> wrote: > > > 2010/5/7 Keith Hui <[email protected]> >> >> I think I should get CAR running. But CAR is not quite developed for >> the rest of the 6xx family. >> >> If you look at the boot log you'll see that it got through to SeaBIOS >> just fine. My coreboot is still on romcc. >> >> What are the steps needed to enable CAR on a board? > > Example: see attached patch (as an example/reference only because > USE_PRINTK_IN_CAR, in src/mainboard/asus/p2b/Kconfig, somehow breaks > booting/serial output.. waiting for my pci post card to arrive). >>
All that I can find with importance is two Kconfig options... Booting failed with POST code 0x10. Digging into code now. -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
