Signed-off-by: Marc Bertens <[email protected]> Part two now the PIRQ table for the Nokia IP530.
Changes made: - rebuild the table to get th eNICs and PCMCIA controllers get there correct IRQs assigned. - Added a stub pirq_assign_irqs() due to the fact that it was missing at compilation time. This was discussed with Rudolf Marek (ruik) <[email protected]> Marc On Thu, 2010-05-27 at 11:56 +0200, mbertens wrote: > Hi all, > > Here is the patch just for the pirq_routing() function. Its made > specific to the CONFIG_NORTHBRIDGE_INTEL_440BX if that is to generic > please replace by CONFIG_BOARD_NOKIA_IP530. > > Put the following extras in the file; > - added header accordingly "Common License Header" that was missing. > - corrected a printk() warning of the compiler. > - added the correction for the i440BX by AND the link value with 0x5F > so that always the value is kept below 0x5F. That AND value should be > 0x03 i think because the link value cannot be greater than 3. But i'm > not sure about that, thats why i used the current solution. > > The other patches will follow to day. > > Marc > > > > On Wed, 2010-05-26 at 15:14 -0600, Myles Watson wrote: > > On Wed, May 26, 2010 at 2:15 PM, mbertens <[email protected]> wrote: > > > On Wed, 2010-05-26 at 11:00 -0600, Myles Watson wrote: > > >> + // fix made by Marc Bertens <[email protected]> > > >> + if (link > 0x5f) { > > >> + // This is basically for the 440BX > > >> + link -= 0x5f; > > >> + } > > >> > > >> I'd prefer this to be guarded by > > >> #if CONFIG_NORTHBRIDGE_INTEL_440BX (or whatever the correct one is) > > > I was thinking of it to put it that way, but i'd. But i will make the > > > changes to the code. > > >> > -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
