On Thu, Jun 10, 2010 at 05:46:24PM -0400, Arne Georg Gleditsch wrote: > Joe Korty <[email protected]> writes: > > FYI, the K8 version of the h8dme-2 (which works) has this comment in it. > > This comment isn't in the h8dmr version (K8 or K10) nor in the h8qme > > K10 version. I wonder how the K8 version initializes the node 00 bank? > > Whatever that is, I think I need it here also. > > Haha, I just had a look and noticed this too. This appears to be a > massive hack which simply pretends that the SPD addresses of the node 0 > banks are the same as the ones for node 1 -- so instead of probing the > banks on both node, the code is in effect probing the banks on node 1 > twice. This is harmless as long as both sockets are identically > populated, but fairly brittle... > > To recreate for the fam10 infrastructure, you'll need a somewhat > non-standard spd_addr.h. Since the addresses you have for the second > node seems to work, you could start with just copying them to the line > representing the first node as well.
Thanks, I'll play with this tomorrow and see what happens.... Joe -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
