On 06/20/2010 07:55 AM, Stefan Reinauer wrote:
Hello,
This patch adds support for the Intel D810E2CB desktop board. This
patch has to go in after the other two patches I have submitted, it is
dependent on them. Hurray, this is the first i810 board running CAR :-)
Build and boot (bootlog attached) tested:
Signed-off by: Joseph Smith <[email protected]>
Acked-by: Stefan Reinauer <[email protected]>
with some caveats:
Index: src/mainboard/intel/d810e2cb/gpio.c
===================================================================
--- src/mainboard/intel/d810e2cb/gpio.c (revision 0)
+++ src/mainboard/intel/d810e2cb/gpio.c (revision 0)
@@ -0,0 +1,212 @@
+#define ICH_IO_BASE_ADDR 0x00000500 /* GPIO base address register */
This is duplicated from i82801ax_lpc.c ... Can it go into i82801ax.h and
be included here instead? (It's also called GPIO_BASE_ADDRESS elsewhere)
+
+ /* Set the value for GPIO base address register and enable GPIO. */
+ pci_write_config32(dev, 0x58, (ICH_IO_BASE_ADDR | 1));
+ pci_write_config8(dev, 0x5c, 0x10);
+
0x58 is GPIO_BASE_ICH0_5 in i82801ax.h (should be renamed to GPIO_BASE I
guess)
+ udelay(10);
Index: src/mainboard/intel/d810e2cb/Kconfig
===================================================================
--- src/mainboard/intel/d810e2cb/Kconfig (revision 0)
+++ src/mainboard/intel/d810e2cb/Kconfig (revision 0)
@@ -0,0 +1,65 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2010 Joseph Smith<[email protected]>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+config BOARD_INTEL_D810E2CB
+ bool "D810E2CB"
+ select ARCH_X86
+ select CPU_INTEL_SOCKET_FC_PGA370
+ select NORTHBRIDGE_INTEL_I82810
+ select SOUTHBRIDGE_INTEL_I82801BX
+ select SUPERIO_SMSC_SMSCSUPERIO
+ select HAVE_PIRQ_TABLE
+ select UDELAY_TSC
+ select BOARD_ROMSIZE_KB_512
+ select HAVE_MAINBOARD_RESOURCES
+ select USE_PRINTK_IN_CAR
can this go into the CPU's Kconfig?
+ select GFXUMA
+ select USE_DCACHE_RAM
And this, too?
+ select TINY_BOOTBLOCK
And this?
+
+config MAINBOARD_DIR
+ string
+ default intel/d810e2cb
+ depends on BOARD_INTEL_D810E2CB
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "D810E2CB"
+ depends on BOARD_INTEL_D810E2CB
+
+config HAVE_OPTION_TABLE
+ bool
+ default n
+ depends on BOARD_INTEL_D810E2CB
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xffdf8000
+ depends on BOARD_INTEL_D810E2CB
And this.
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x8000
+ depends on BOARD_INTEL_D810E2CB
+
And this.
+config IRQ_SLOT_COUNT
+ int
+ default 7
+ depends on BOARD_INTEL_D810E2CB
+
Stefan
Done, thanks r5637 and r5638
--
Thanks,
Joseph Smith
Set-Top-Linux
www.settoplinux.org
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
