Remove unused variables from 6300ESB smbus_write_block().
#if 0 smbus_write_byte() and smbus_write_block() as they are
static and nothing uses them or are incompletely implemented.
Signed-off-by: Jonathan Kollasch <[email protected]>
---
Index: src/southbridge/intel/esb6300/esb6300_early_smbus.c
===================================================================
--- src/southbridge/intel/esb6300/esb6300_early_smbus.c (revision 5965)
+++ src/southbridge/intel/esb6300/esb6300_early_smbus.c (working copy)
@@ -22,6 +22,7 @@
return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
}
+#if 0
static void smbus_write_byte(unsigned device, unsigned address, unsigned char
val)
{
if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) {
@@ -33,8 +34,6 @@
static int smbus_write_block(unsigned device, unsigned length, unsigned cmd,
unsigned data1, unsigned data2)
{
- unsigned char global_control_register;
- unsigned char global_status_register;
unsigned char byte;
unsigned char stat;
int i;
@@ -95,4 +94,5 @@
print_debug("SMBUS Block complete\n");
return 0;
}
+#endif
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
