On Thu, 2011-04-07 at 17:39 +0200, Peter Stuge wrote: > Jeremy Moles wrote: > > > To clarify, superiotool has functions internally for writing to > > > registers in superios, > .. > > I will need to find whatever register corresponds to GPIO03 and > > set just that particular HIGH bit? > > Yes. Look at the data sheet and maybe as a help you can step through > superiotool as well. > > > > (Other keywords in their email were things like "GPIO:0x2" and > > GPIO:0x18", but I haven't been able to get any additional > > clarification from them...) > > Superios are easier to program than many other components, and are > well documented, so you shouldn't have too much trouble. GPIO 3 is > what you need to know about how the hardware is built.
I do have a document describing the hardware pretty thoroughly, but I am unfamiliar with the terminology it uses and how I would map that into something I AM familiar with in Linux. When you say well-documented: is there a particular document you can think of offhand? At any rate, I'm sure I'm close to the edge of how much this list is willing to tolerate. :) Thanks for the help, hopefully I can make something out of this... > //Peter > -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
