Paul Geraedts wrote: > > The OLS is not a good fit for installation into e.g. a laptop. This > > is one of the use cases for a QiProg; it's intended to be soldered > > into the target system, on top of, or very near, the flash chip. > > Can you please post a reference to this QiProg device? I would like to > read more about it and Google does not seem to know it.
The information available so far is the USB protocol at http://stuge.se/qiprog_protocol.txt and beyond that there's the LPC11U14 schematic in my head along with some PCB layout ideas, the more advanced of which is the QFN33 chip on a flex(-rigid) PCB with edge pads that align with a 200 mil SO8 outline, for soldering directly onto the existing flash chip, and some 10-15 cm of flex circuit ending in a flex-rigid section with a micro-USB connector. The first PCB will of course more likely be plain and simple, maybe even with QFP, and edge pads for flash chip as well as USB connections. //Peter -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
