On 11/25/2013 04:20 PM, Dave Frodin wrote:
I wouldn't think it would be a bad board if the AMI bios works.
When you enabled "Add a VGA BIOS image" and changed the default
graphics ID for your VBIOS did you change it from
1002,9830 to 1002,9834?
On Mon, Nov 25, 2013 at 4:35 PM, Prop 395 <[email protected]
<mailto:[email protected]>> wrote:
I tried the .config file and adjusted the VBIOS for my dev system,
but I am still getting the same results (no video). The sticker
on the motherboard near the power connector says IMB-A180E-H E.
Printed on the right edge of the motherboard near the heat sink it
says IMB-A180-H REV. G/A 1.02.
I also tried the stock AMI BIOS to confirm it still works (and it
did).
Do I just have a bad board?
--
coreboot mailing list: [email protected]
<mailto:[email protected]>
http://www.coreboot.org/mailman/listinfo/coreboot
I saw in your .config the device ID was already set to 9834 and cbfstool
print confirms it.
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
