Hi Patrick, You can look at the Oxford pcie card and 8250MEM drivers for reference: src/drivers/uart/oxpcie* src/drivers/uart/uart8250mem*
Marc On Fri, Mar 6, 2015 at 9:37 AM Patrick Agrain < [email protected]> wrote: > Hello everybody, > > Do you think that it would be possible to output the console messages > from coreboot (seabios) on another UART port (strapped to be visible on > Memory-based space or IO Space) connected on a PCIe slot ? > > I've purchased a StarTech UART board with an OXPCIe952 chip, with the > same IDs as visible in ./src/drivers/uart/oxpcie.c. > > On > http://www.coreboot.org/Serial_console#PCIe.2FMini_PCIe_based_serial_cards > , > what is behind the sentence: > "In order to use the card for romstage debugging, minimal setup of the > PCIe bridge and the MPEX2S952 have to be added to romstage.c" ? > > Thanks in advance. > Best regards, > Patrick Agrain > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
