Yu-Cheng, looking through the log and just have two suggestions here. 1. It mentions the payload size is 0xc5a5, is it too small for a payload? My understanding is that something wrong in payload compressing, please set CONFIG_COMPRESSED_PAYLOAD_LZMA to N and try again, I remember I saw similar issue few years ago, but never look into the details.
CBFS: Found @ offset 102c0 size c5a5 2. I noticed you've reported 0xC000 - 0xFFFFF as the normal RAM, QEMU should have shadow RAM switches for this special address RAM, I would suggest you reporting the RAM starting from 0x10000. 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000c0000-0000000007fb0fff: RAM 3. 0000000007fb1000-0000000007ffffff: CONFIGURATION TABLES On Thu, Jun 18, 2015 at 10:58 AM, Yu-Cheng Liu <[email protected]> wrote: > hello, > Below are my error message when using SeaBIOS as coreboot payload,Please > help me figure out what’s wrong with my steps.Thank you in advance. > > > coreboot table: 316 bytes. > IMD ROOT 0. 07fff000 00001000 > IMD SMALL 1. 07ffe000 00001000 > CONSOLE 2. 07fde000 00020000 > ACPI 3. 07fba000 00024000 > SMBIOS 4. 07fb9000 00000800 > COREBOOT 5. 07fb1000 00008000 > IMD small region: > IMD ROOT 0. 07ffec00 00000400 > CAR GLOBALS 1. 07ffebe0 0000000c > ROMSTAGE 2. 07ffebc0 00000004 > GDT 3. 07ffe9c0 00000200 > CBFS provider active. > CBFS @ 100000 size ffc80 > CBFS: Locating 'fallback/payload' > CBFS: Found @ offset 102c0 size c5a5 > 'fallback/payload' located at offset: 1102f8 size: c5a5 > Loading segment from rom address 0xfff102f8 > code (compression=1) > New segment dstaddr 0xe7c04 memsize 0x183fc srcaddr 0xfff10330 filesize > 0xc56d > Loading segment from rom address 0xfff10314 > Entry Point 0x000fcfff > Bounce Buffer at 07f5e000, 338264 bytes > Loading Segment: addr: 0x00000000000e7c04 memsz: 0x00000000000183fc > filesz: 0x000000000000c56d > lb: [0x0000000000100000, 0x00000000001294ac) > Post relocation: addr: 0x00000000000e7c04 memsz: 0x00000000000183fc > filesz: 0x000000000000c56d > using LZMA > lzma: Decoding error = 1 > Payload not loaded. > > > > > PS.:if you want see more about my option setting,step > > Setpup step: > https://dl.dropboxusercontent.com/u/73839141/Qemu_coreboot.pdf > > SeaBIOS config: > https://dl.dropboxusercontent.com/u/73839141/SeaBIOSConfig.txt > > Coreboot config: > https://dl.dropboxusercontent.com/u/73839141/CorebootConfig.txt > > Erro Message: > https://dl.dropboxusercontent.com/u/73839141/ErrMsg.txt > > > > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
