Thanks for your kindly reply. 1.I tried your suggestion,disable CONFIG_COMPRESSED_PAYLOAD_LZMA option,but still not work(I also disable SeaBIOS any about LZMA option),do anything else I can try?
2.I can't find out where I can change the Memory begin address(I tried to change some coreboot address,but It seems no work, I find log address, nothing get change),If you know ,please point out where I need to modify. thank you~ 2015-06-24 17:55 GMT+08:00 WANG FEI <[email protected]>: > Yu-Cheng, looking through the log and just have two suggestions here. > > 1. It mentions the payload size is 0xc5a5, is it too small for a payload? > My understanding is that something wrong in payload compressing, please set > CONFIG_COMPRESSED_PAYLOAD_LZMA > to N and try again, I remember I saw similar issue few years ago, but never > look into the details. > > CBFS: Found @ offset 102c0 size c5a5 > > 2. I noticed you've reported 0xC000 - 0xFFFFF as the normal RAM, QEMU > should have shadow RAM switches for this special address RAM, I would > suggest you reporting the RAM starting from 0x10000. > > 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES > 1. 0000000000001000-000000000009ffff: RAM > 2. 00000000000c0000-0000000007fb0fff: RAM > 3. 0000000007fb1000-0000000007ffffff: CONFIGURATION TABLES > > > On Thu, Jun 18, 2015 at 10:58 AM, Yu-Cheng Liu <[email protected]> > wrote: > >> hello, >> Below are my error message when using SeaBIOS as coreboot payload,Please >> help me figure out what’s wrong with my steps.Thank you in advance. >> >> >> coreboot table: 316 bytes. >> IMD ROOT 0. 07fff000 00001000 >> IMD SMALL 1. 07ffe000 00001000 >> CONSOLE 2. 07fde000 00020000 >> ACPI 3. 07fba000 00024000 >> SMBIOS 4. 07fb9000 00000800 >> COREBOOT 5. 07fb1000 00008000 >> IMD small region: >> IMD ROOT 0. 07ffec00 00000400 >> CAR GLOBALS 1. 07ffebe0 0000000c >> ROMSTAGE 2. 07ffebc0 00000004 >> GDT 3. 07ffe9c0 00000200 >> CBFS provider active. >> CBFS @ 100000 size ffc80 >> CBFS: Locating 'fallback/payload' >> CBFS: Found @ offset 102c0 size c5a5 >> 'fallback/payload' located at offset: 1102f8 size: c5a5 >> Loading segment from rom address 0xfff102f8 >> code (compression=1) >> New segment dstaddr 0xe7c04 memsize 0x183fc srcaddr 0xfff10330 filesize >> 0xc56d >> Loading segment from rom address 0xfff10314 >> Entry Point 0x000fcfff >> Bounce Buffer at 07f5e000, 338264 bytes >> Loading Segment: addr: 0x00000000000e7c04 memsz: 0x00000000000183fc >> filesz: 0x000000000000c56d >> lb: [0x0000000000100000, 0x00000000001294ac) >> Post relocation: addr: 0x00000000000e7c04 memsz: 0x00000000000183fc >> filesz: 0x000000000000c56d >> using LZMA >> lzma: Decoding error = 1 >> Payload not loaded. >> >> >> >> >> PS.:if you want see more about my option setting,step >> >> Setpup step: >> https://dl.dropboxusercontent.com/u/73839141/Qemu_coreboot.pdf >> >> SeaBIOS config: >> https://dl.dropboxusercontent.com/u/73839141/SeaBIOSConfig.txt >> >> Coreboot config: >> https://dl.dropboxusercontent.com/u/73839141/CorebootConfig.txt >> >> Erro Message: >> https://dl.dropboxusercontent.com/u/73839141/ErrMsg.txt >> >> >> >> >> -- >> coreboot mailing list: [email protected] >> http://www.coreboot.org/mailman/listinfo/coreboot >> > >
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
