-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 11/20/2016 01:29 PM, taii...@gmx.com wrote: > I have tried booting with multiple gentoo kernels but every time it > either hangs on amd_pmu_init ("amd performance counters") with a stack > trace or simply black screens and reboots quickly.
The stack trace would help. This is probably a kernel issue; Gentoo may have enabled a little-used feature and it may not work correctly under coreboot. Need the trace to debug further. > > + (if anyone knows) How come I have to run fancontrol/pwmconfig to get > the fans to slow down? The proprietary bios had the same issue until I > found an option for "whisper" fan control mode. The KGPE-D16 is a server board; as such, it is appropriate to set fans to full speed until the OS-based thermal management controls can take over. Without this feature, a system that overheated (e.g. if fans were set to a low RPM incorrectly) may either get stuck in a reboot loop or power down entirely in a remote location. Needless to say, requiring physical intervention over this type of fault is undesirable in a server system. - -- Timothy Pearson Raptor Engineering +1 (415) 727-8645 (direct line) +1 (512) 690-0200 (switchboard) https://www.raptorengineering.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJYMxrwAAoJEK+E3vEXDOFbDNYH/RsdQpFNUgioa7GRuL49Zddf 48P+RpeB15RnuQq1D+8DzaI2oTEpfTRVK9IvRoHKFpCF8LmAPaBBzYqTCDlyqYCn TlV6OCUClhL3L7uOElvj1lZQYU+rwrCxvqHxbYOhi2dMovsx6JBGnLdyash5IO7S 8bNnNzdQQ+vWqB+MeD5xUTo+4jFS1U1j8jMbPicOwAtizPgnB9eLjYhTcKRe0sZg Elvvm8g9gTBIAb+JkDs2WAkKN3g4MLYiR/ShgJ3Bhk7tM3Qeh0DTmO7RyLG3M4eT JI7pGrh+85pAttgDIUrf3sTmLGubUSn5D3yFeJ3u8uGOJDXcnxuCzx8IGE9jDr0= =khHr -----END PGP SIGNATURE----- -- coreboot mailing list: coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot