in http://wiki.solid-run.com/doku.php?id=products:ibx:documents , there is SolidPC Schematics :
page 1 : you can read: *""Notice that the programmer must drive 1.8v signals; otherwise* *the main processor might get damaged.""* 2016-12-14 15:05 GMT+01:00 Peter Stuge <[email protected]>: > sebastien basset wrote: > > For flashing board solidpc, > > 1/ plug power supply (without pressing the power button) > > 2/ connect dediprog on j8 connector( with good cable) > > 3/ ./flashrom -p dediprog:voltage=1.8V -w solidrun.rom > > Why 1.8V? Is there a schematic available for this board? > > > //Peter > > -- > coreboot mailing list: [email protected] > https://www.coreboot.org/mailman/listinfo/coreboot > -- Sébastien Basset
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
