On Mon, Jan 23, 2017 at 2:41 PM, Maxim Gusev via coreboot < [email protected]> wrote:
> Hi Daniel, > > Now I have compiled coreboot 4.5 with the SeaBIOS 1.9.3 as a payload and > the VGAbios: > I am using the Asus EN8600GT as a videocard (PCIe) and I took out the > binary here: > https://www.techpowerup.com/vgabios/?architecture=&; > manufacturer=Asus&model=8600+GT&interface=PCI-E&memType=& > memSize=256&since= > > Also I have turned on in console settings "Show POST codes...", but there > is nothing works:( > You probably also need POST_DEVICE_PCI_PCIE set in your .config. In menuconfig: "Device to send POST codes to" -> "PCI/PCIe". As for the serial port: I think this mainboard is not a retail version, but came from ASUS Essentio Desktop PC CM1745. http://www.ascendtech.us/asus-f2a85-m-cm1745-dp-motherboard_i_mb90mibiw5g0xbn.aspx Looks like RS232 level translator ICs are also missing and some other differences on BOM too. Kyösti
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
