On Tue, Mar 14, 2017 at 10:40 AM, Gert Menke <[email protected]> wrote: > Hi, > > forget everything I said; this was a hardware issue. > > When I was first flashing coreboot, I had some problems with my SPI > programmer and I was unsure if I had damaged the flash chip. So I replaced > it (a MX25L3206E) with another one - a Winbond W25Q32 - that I programmed > externally before soldering it on the board. I expected it to be > sufficiently similar to the Macronix chip, and when flashing and booting > and reprogramming from Linux worked without problems, I did no longer think > about it. But obviously there are some subtle differences. I put back the > MX25L3206E on the board, and now everyting, including suspend and resume, > works fine. > > We would like to have/keep possibility for changing SPI flash parts. It would be nice if someone with knowledge on IFD would take a look if some fields have to be modified and support that in ifdtool. I did found the ID pair 0xEF 0x4016 there in your previous dump, it should have matched your W25Q32.
Kyösti > Nevertheless, thanks for your help! > > Gert >
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
