Does a windows driver (for host PC where I want to see coreboot log) exist for this solution with BeagleBone?
-----Original Message----- From: Andrey Korolyov [mailto:[email protected]] Sent: Friday, August 04, 2017 3:58 PM To: Аладышев Константин Cc: coreboot Subject: Re: [coreboot] EHCI debug that supports both Linux and Windows as a host PC On Fri, Aug 4, 2017 at 3:14 PM, Аладышев Константин <[email protected]> wrote: > What is the easiest and most stable way to do debug through EHCI USB > port instead of COM port? Is there any EHCI dongles on market that > supports both Linux and Windows as a host PC? > The answer varies depending on your exact needs. If you are targeting only on coreboot log obtainment, the RaspberryPI/BeagleBone with dwc2 is probably cheapest cross-platform thing to use. For kgdb, this setup *should* work, but this would add another level of complexity due to gdbserver spatial localization :) I`ve never tried working with combination of the RPI and usb-ip to pass dwc2 port over cdc-ethernet connection, this is the only major difference between 'real' dongle and cheap board-based setup. -- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
