Garrett, I have seen this before. Details are probably in the coreboot list logs somewhere. It basically would freeze on reboot and then after about 20s reset it self. I have bypassed the issue without actually fixing it but forcing a CPU reset on reboot.
PS: I had disabled it to ensure that bios chip was not written to, so we can now do a verify on the whole chip. Hope this helps. Naveed From: coreboot [mailto:[email protected]] On Behalf Of GARRETT DOORENBOS Sent: Tuesday, 12 December 2017 1:17 AM To: [email protected] Subject: [coreboot] Can't disable CONFIG_ENABLE_FSP_FAST_BOOT flag on Intel Baytrail platform Hello, I'm running coreboot on an Intel Atom Bay Trail based platform. When I turn off the CONFIG_ENABLE_FSP_FAST_BOOT flag, I get stuck in the Intel FSP (it never returns) after a warm boot. The only way around it is a power cycle. Has anyone seen this before? Thanks, Garrett Doorenbos Software Engineer - Almost Hardware Office: 256.963.6369 Email: [email protected]<mailto:[email protected]> Web: www.adtran.com<https://linkprotect.cudasvc.com/url?a=http://s.bl-1.com/h/CoY1mz9%3furl%3dhttp://www.adtran.com&c=E,1,2DSyxCwqxEyuAYzWqoL_8XrwwRvZGOfu7A9Ne0BEZTcWSRd9hjAVRj_oJEqZSjjv4vZxRfPxuDX7ILYejOVyBkMJoASQy3DQIIMw9dgQ6C_AzJib990,&typo=1> ADTRAN 901 Explorer Boulevard Huntsville, AL 35806 - USA [ADTRAN]<https://linkprotect.cudasvc.com/url?a=http://s.bl-1.com/h/CoY1mz9%3furl%3dhttp://www.adtran.com&c=E,1,Fr-rPYRO5eeFxu_fXGE881ZIur_ANAqvAXduiqfKN1WHSi7RtnPhrxVQxp7Zv-VW_qIndoxYs1I1epoHnrOzZ0acQk9BCpNhXOQlyQS66CtX13X9-3k,&typo=1>
-- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
