Hello Hilbert, I looked into the Coreboot logs (SeaBIOS ones, you have posted recently).
My comments with: <<=================================== _______ ress ESC for boot menu. Searching bootorder for: HALT Space available for UMB: c2000-ee800, f6940-f70d0 Returned 192512 bytes of ZoneHigh e820 map has 9 items: <<=========================== Sounds very correct: you have in total 8GB of physical DDR3, aren't you? 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 000000007efb0000 = 1 RAM 4: 000000007efb0000 - 0000000090000000 = 2 RESERVED 5: 00000000feb00000 - 00000000feb10000 = 2 RESERVED 6: 00000000feb80000 - 00000000fef00000 = 2 RESERVED 7: 00000000ff000000 - 0000000100000000 = 2 RESERVED 8: 0000000100000000 - 0000000280000000 = 1 RAM enter handle_19: NULL Booting from ROM... Booting from c000:0b91 enter handle_18: NULL Booting from ROM... Booting from c100:0b91 enter handle_18: NULL Booting from Floppy... Boot failed: could not read the boot disk enter handle_18: NULL Booting from Hard Disk... Boot failed: could not read the boot disk <<============================== This also sounds correct. enter handle_18: NULL No bootable device. Retrying in 60 seconds. Rebooting. In resume (status=0) In 32bit resume Attempting a hard reboot ACPI hard reset 1:cf9 (6) _______ I have no idea if yuo have there attached HDD/SSD drive? If you do, with GRUB2 + Linux (whatever Linux distro it is), it depends how the drive is configured? Either for UEFI (will NOT work), either for UEFI + MBR or MBR only - should work. You need to investigate what yuor attached drive is: cat, dog, or combination (UEFI, MBR, or MBR + UEFI)? Please, upgrade me with the info I requested (memory and drive)? Thank you, Zoran _______ On Fri, Jan 5, 2018 at 6:17 AM, Hilbert Tu(杜睿哲_Pegatron) <[email protected]> wrote: > Hi David, > > > > After trying to use SeaBIOS as payload, I got more information about reboot > issue as attached file. While U-Boot just reboots directly and Grub hangs, > the SeaBIOS’s dump complains “No bootable device” at the end. Do you think > is it the cause of reboot? Can I say my U-Boot and Grub versions are not > supporting BDX-DE? > > > > -Hilbert > > This e-mail and its attachment may contain information that is confidential > or privileged, and are solely for the use of the individual to whom this > e-mail is addressed. If you are not the intended recipient or have received > it accidentally, please immediately notify the sender by reply e-mail and > destroy all copies of this email and its attachment. Please be advised that > any unauthorized use, disclosure, distribution or copying of this email or > its attachment is strictly prohibited. > 本電子郵件及其附件可能含有機密或依法受特殊管制之資訊，僅供本電子郵件之受文者使用。台端如非本電子郵件之受文者或誤收本電子郵件，請立即回覆郵件通知寄件人，並銷毀本電子郵件之所有複本及附件。任何未經授權而使用、揭露、散佈或複製本電子郵件或其附件之行為，皆嚴格禁止。 -- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
