Thank you for your reply Timothy.
I removed the heatsink and cleaned the cpu contacts.
Now it boots.
Thank you for your support.
On 14/02/18 22:46, Timothy Pearson wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Dead / incompatible DIMM, DIMM(s) in wrong slots, or damaged mainboard.
The fact that the vendor BIOS won't post is a very bad sign, since in
our experience the vendor BIOS is far more forgiving of faulty DIMMs
than coreboot (basically, the vendor BIOS will show something on the VGA
port even if the DIMMs are completely damaged and unable to properly
On 02/14/2018 03:28 PM, Elisenda Cuadros wrote:
I recently bought an Asus KGPE-D16 board, with an Opteron 6238 and 4
Micron MT18JSF25672PDZ-1G4F1DD modules.
Firstly I tried to boot with vendor BIOS but I don't get any output on VGA.
I have a PCI Post Card and it seems it arrives to 3E and then I think it
enters in a loop.
I flashed Coreboot with default settings just to try to get some more
useful logs. The result I think is more or less the same, it doesn't
arrive to payload.
Memory is installed in A2,B2,C2 and D2 slots.
I spent multiple hours trying to figure where is the problem.
Do you have any ideas?
I attach the console log.
Thanks in advance.
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
-----END PGP SIGNATURE-----
coreboot mailing list: firstname.lastname@example.org