On 07/12/2018 11:04 PM, taii...@gmx.com wrote: > I will provide logs soon! what do you want exactly? > > One apparent regression I have noticed is that "sensors" reports CPU > power usage at idle is now steady at 101W vs the usual 50W (which used > to be 40 before a kernel update) while I am not sure if it is accurate > as the cpu temp doesn't reach high levels expected for such wattage it > does have one bad effect in that Turbo 2 no longer works...and even > before this update with my v4.6 to get Turbo 1 on all cores as AMD > advertises I must use "tpc -psmax 1"[1] which brings up the sensors > reported TDP to 125W whereas normally it wouldn't work due to maxing out > at 115W and 3.35ghz rather than T1 3.5ghz the TDP determining when the > CPU enters full turbo 1. > > I use Turbo 2 to obtain better performance on non-multithreaded games so > this is disappointing but I will investigate further. > > [1] turionpowercontrol, an overclocking software
This sounds like CC6 broke. Can you check to see if CC6 is enabled in your NVRAM settings? -- Timothy Pearson Raptor Engineering +1 (415) 727-8645 (direct line) +1 (512) 690-0200 (switchboard) https://www.raptorengineering.com -- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot