[re-adding the list while we're at it] On Tue, Jul 31, 2018 at 2:34 PM, David Hendricks <david.hendri...@gmail.com> wrote: > Hi Zahra, > That header may be out of date > (https://mail.coreboot.org/pipermail/coreboot/2017-August/084800.html). > > I had to manually download the microcode file corresponding to my > processor SKU from Intel. Use the link I sent you earlier to download > Baytrail_FSP_Gold4.tgz and see if the microcode headers included in > that tarball match your processor. The Atom on my Minnowboard Turbot > has a CPUID of 30679, so I needed to use M0130679901.h. > > (note that the Minnowboard Max uses an Atom E3825, while the Turbot > uses an E3826 dual-core SoC or E3845 quad-core SoC) > > On Mon, Jul 30, 2018 at 2:36 AM, zahra rahimkhani > <zrahimkhani2...@gmail.com> wrote: >> >> Dear David >> >> for Microcode file I just it from coreboot source from this path >> coreboot/3rdparty/blobs/soc/intel/baytrail/microcode_blob.h >> >> Is that good ? >> >> Thanks , >> >> >> On Sun, Jul 29, 2018 at 1:18 PM zahra rahimkhani <zrahimkhani2...@gmail.com> >> wrote: >>> >>> Hi David, >>> >>> Thank you very much for your guide. >>> >>> I got this comments on my config and changes it based on your config. >>> But I can not see any thing on output. >>> Could you tell me which Uart pins do you use on Minnowboard max >>> >>> I used it 6 pin that are separately on board . >>> >>> I would be grateful if you guide me . >>> I got my new config here . >>> https://paste.flashrom.org/view.php?id=3097 >>> >>> Also , Could you tell me what is this parameter >>> CONFIG_UART_FOR_CONSOLE=0 >>> and >>> CONFIG_DRIVERS_UART_8250IO >>> >>> Cheers! >>> Zahra >>> >>> >>> >>> On Fri, Jul 27, 2018 at 11:06 AM David Hendricks >>> <david.hendri...@gmail.com> wrote: >>>> >>>> Hi Zahra, >>>> >>>>> I got my config file here >>>>> https://paste.flashrom.org/view.php?id=3096 >>>> >>>> >>>> Thanks, that helps a lot! >>>> >>>> The last config that I tested is >>>> https://review.coreboot.org/cgit/board-status.git/plain/intel/minnowmax/4.6-1358-g49d117c69f/2017-09-06T06_53_39Z/config.txt >>>> >>>> If you diff my config and yours, it seems you have several options >>>> disabled which I think you should try enabling: >>>> CONFIG_HAVE_IFD_BIN >>>> CONFIG_HAVE_ME_BIN >>>> CONFIG_TTYS0_LCS >>>> CONFIG_DRIVERS_UART_8250IO >>>> CONFIG_IFD_BIN_PATH >>>> CONFIG_ME_BIN_PATH >>>> CONFIG_LOCK_MANAGEMENT_ENGINE >>>> CONFIG_DRIVERS_UART >>>> CONFIG_CONSOLE_SERIAL >>>> CONFIG_CONSOLE_SERIAL_115200 >>>> >>>> You can find these by using the search function in `make menuconfig`. >>>> Press '/' and type a Kconfig option. >>>> >>>>> I would be grateful if you check my config and tell me what is ifdtool >>>>> in Coreboot and how >>>>> I use it. >>>>> and How I find Intel ME file for my board and GBE for a network on my >>>>> board. >>>> >>>> >>>> ifdtool is a tool for viewing and manipulating an Intel Flash Descriptor >>>> binary. The flash descriptor is a 4KB data structure at the start of the >>>> ROM's address space (offset 0x000000-0x000fff). >>>> >>>> To build it: `make -C util/ifdtool` >>>> To run it: `util/ifdtool/ifdtool` >>>> >>>> You'll probably want to use the '-x' option to extract the individual >>>> modules from an existing Minnowboard Max firmware image (e.g. the UEFI >>>> image >>>> that comes with the board). That will give you the ME and GBE files. >>>> >>
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot