---------- Forwarded message --------- From: zahra rahimkhani <zrahimkhani2...@gmail.com> Date: Sat, Aug 18, 2018 at 12:47 PM Subject: Re: [coreboot] USB to Serial Converters To: David Hendricks <david.hendri...@gmail.com>
Hello David Thank you very much for your help . I used version 4.8 but it shows this message on consol and do not boot usb flash or sata. Running option rom at c000:0003 Turning on vga text mode console SeaBIOS (version rel-1.11.2-0-gf9626cc) EHCI init on dev 00:1d.0 (regs=0xd061e020) WARNING - Timeout at i8042_flush:71! AHCI controller at 00:13.0, iobase 0xd061d000, irq 10 Searching bootorder for: /pci@i0cf8/*@12 Found 0 lpt ports Found 1 serial ports Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/storage@1/*@0/*@0,0 Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/usb-*@1 USB MSC vendor='UFD 2.0' product='Silicon-Power8G' rev='1100' type=0 removable=1 USB MSC blksize=512 sectors=15730688 Initialized USB HUB (1 ports used) All threads complete. Scan for option roms Press ESC for boot menu. Searching bootorder for: HALT drive 0x000f62c0: PCHS=0/0/0 translation=lba LCHS=979/255/63 s=15730688 Space available for UMB: cd800-ed800, f5b60-f62c0 Returned 253952 bytes of ZoneHigh e820 map has 18 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 0000000020000000 = 1 RAM 4: 0000000020000000 - 0000000020100000 = 2 RESERVED 5: 0000000020100000 - 000000007ad9c000 = 1 RAM 6: 000000007ad9c000 - 0000000080000000 = 2 RESERVED 7: 00000000e0000000 - 00000000f0000000 = 2 RESERVED 8: 00000000feb00000 - 00000000fec01000 = 2 RESERVED 9: 00000000fed01000 - 00000000fed02000 = 2 RESERVED 10: 00000000fed03000 - 00000000fed04000 = 2 RESERVED 11: 00000000fed05000 - 00000000fed06000 = 2 RESERVED 12: 00000000fed08000 - 00000000fed09000 = 2 RESERVED 13: 00000000fed0c000 - 00000000fed10000 = 2 RESERVED 14: 00000000fed1c000 - 00000000fed1d000 = 2 RESERVED 15: 00000000fee00000 - 00000000fee01000 = 2 RESERVED 16: 00000000fef00000 - 00000000ff000000 = 2 RESERVED 17: 00000000ff800000 - 0000000100000000 = 2 RESERVED enter handle_19: NULL Booting from Hard Disk... Booting from 0000:7c00 I would be grateful if you guide me . I should set a special config or no? Best , Zahra On Sun, Aug 5, 2018 at 4:35 PM David Hendricks <david.hendri...@gmail.com> wrote: > Hi Zahra, > Yes, I used the 6-pin serial port header. Also, make sure the microcode > header(s) you include correspond to the CPUID of your processor. The E3825 > and E3826 use different microcode headers, so M0130679901.h will not work > for you. > > Please keep the coreboot mailing list CC'd. I haven't done anything with > Minnowboard in several months and others may be able to help. > > On Thu, Aug 2, 2018 at 5:01 PM, zahra rahimkhani < > zrahimkhani2...@gmail.com> wrote: > >> Hi David >> >> Thank you for your help. >> I extract your file and got M0130679901.h as Microcode but my board does >> not work it did not show anything. >> I use E3825. >> In previous notes, you told "My guess is that you don't have >> CONFIG_ENABLE_BUILTIN_COM1 selected >> (under "Chipset"), which is an option you have to set in addition to >> the stuff under "Console." >> but in your config, you had not enabled this option. >> Could you help me with this and Did you use 6 pins that are separated >> on board for console port? >> I do not know what is my problem .it did not show anything log. >> >> >> >> Thank you for your time. >> Zahra >> >> >> >> On Wed, Aug 1, 2018 at 2:04 AM David Hendricks <david.hendri...@gmail.com> >> wrote: >> >>> Hi Zahra, >>> That header may be out of date >>> (https://mail.coreboot.org/pipermail/coreboot/2017-August/084800.html). >>> >>> I had to manually download the microcode file corresponding to my >>> processor SKU from Intel. Use the link I sent you earlier to download >>> Baytrail_FSP_Gold4.tgz and see if the microcode headers included in >>> that tarball match your processor. The Atom on my Minnowboard Turbot >>> has a CPUID of 30679, so I needed to use M0130679901.h. >>> >>> (note that the Minnowboard Max uses an Atom E3825, while the Turbot >>> uses an E3826 dual-core SoC or E3845 quad-core SoC) >>> >>> On Mon, Jul 30, 2018 at 2:36 AM, zahra rahimkhani >>> <zrahimkhani2...@gmail.com> wrote: >>> > >>> > Dear David >>> > >>> > for Microcode file I just it from coreboot source from this path >>> > coreboot/3rdparty/blobs/soc/intel/baytrail/microcode_blob.h >>> > >>> > Is that good ? >>> > >>> > Thanks , >>> > >>> > >>> > On Sun, Jul 29, 2018 at 1:18 PM zahra rahimkhani < >>> zrahimkhani2...@gmail.com> >>> > wrote: >>> >> >>> >> Hi David, >>> >> >>> >> Thank you very much for your guide. >>> >> >>> >> I got this comments on my config and changes it based on your config. >>> >> But I can not see any thing on output. >>> >> Could you tell me which Uart pins do you use on Minnowboard max >>> >> >>> >> I used it 6 pin that are separately on board . >>> >> >>> >> I would be grateful if you guide me . >>> >> I got my new config here . >>> >> https://paste.flashrom.org/view.php?id=3097 >>> >> >>> >> Also , Could you tell me what is this parameter >>> >> CONFIG_UART_FOR_CONSOLE=0 >>> >> and >>> >> CONFIG_DRIVERS_UART_8250IO >>> >> >>> >> Cheers! >>> >> Zahra >>> >> >>> >> >>> >> >>> >> On Fri, Jul 27, 2018 at 11:06 AM David Hendricks >>> >> <david.hendri...@gmail.com> wrote: >>> >>> >>> >>> Hi Zahra, >>> >>> >>> >>>> I got my config file here >>> >>>> https://paste.flashrom.org/view.php?id=3096 >>> >>> >>> >>> >>> >>> Thanks, that helps a lot! >>> >>> >>> >>> The last config that I tested is >>> >>> >>> https://review.coreboot.org/cgit/board-status.git/plain/intel/minnowmax/4.6-1358-g49d117c69f/2017-09-06T06_53_39Z/config.txt >>> >>> >>> >>> If you diff my config and yours, it seems you have several options >>> >>> disabled which I think you should try enabling: >>> >>> CONFIG_HAVE_IFD_BIN >>> >>> CONFIG_HAVE_ME_BIN >>> >>> CONFIG_TTYS0_LCS >>> >>> CONFIG_DRIVERS_UART_8250IO >>> >>> CONFIG_IFD_BIN_PATH >>> >>> CONFIG_ME_BIN_PATH >>> >>> CONFIG_LOCK_MANAGEMENT_ENGINE >>> >>> CONFIG_DRIVERS_UART >>> >>> CONFIG_CONSOLE_SERIAL >>> >>> CONFIG_CONSOLE_SERIAL_115200 >>> >>> >>> >>> You can find these by using the search function in `make menuconfig`. >>> >>> Press '/' and type a Kconfig option. >>> >>> >>> >>>> I would be grateful if you check my config and tell me what is >>> ifdtool >>> >>>> in Coreboot and how >>> >>>> I use it. >>> >>>> and How I find Intel ME file for my board and GBE for a network on >>> my >>> >>>> board. >>> >>> >>> >>> >>> >>> ifdtool is a tool for viewing and manipulating an Intel Flash >>> Descriptor >>> >>> binary. The flash descriptor is a 4KB data structure at the start of >>> the >>> >>> ROM's address space (offset 0x000000-0x000fff). >>> >>> >>> >>> To build it: `make -C util/ifdtool` >>> >>> To run it: `util/ifdtool/ifdtool` >>> >>> >>> >>> You'll probably want to use the '-x' option to extract the individual >>> >>> modules from an existing Minnowboard Max firmware image (e.g. the >>> UEFI image >>> >>> that comes with the board). That will give you the ME and GBE files. >>> >>> >>> > >>> >> >
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot